Jump to content
SAU Community

Recommended Posts

as topic says, my diff doesnt seem to lock anymore, and under full throttle in second it doesnt accelerate as hard anymore, would it be the diff not putting the power to the ground through both rear wheels ?

thanks

Edited by Mid_Nite_R33

Have u changed the diff oil recently

It will really come down to road surface. Theoretically if the road has the same grip across the surface it shouldnt make much of a difference. It will only start making a difference if one side has a lack of grip then you will spin that side and it wont put power down

I imagine on normal road conditions it shouldnt really make that much of a difference. If your saying it is really noticable you may have another proble. Sure your clutch isnt slipping? even if its only slipping slightly

Have u changed the diff oil recently

It will really come down to road surface. Theoretically if the road has the same grip across the surface it shouldnt make much of a difference. It will only start making a difference if one side has a lack of grip then you will spin that side and it wont put power down

I imagine on normal road conditions it shouldnt really make that much of a difference. If your saying it is really noticable you may have another proble. Sure your clutch isnt slipping? even if its only slipping slightly

yea i meant on dry even surfaces, Ididnt change the oil recently, but yea in the wet the car does kick sideways anymore so the diff isnt locking up anymore like it used to

maybe the lack of power is just my engine getting old lol

Hmmm I dunno, my diff is fine and its a 1994 R33 GTST, it still locks both fine.... Perhaps its worth taking out and shimming or at least inspecting

Barring a massive failure like Driveshaft/CV which I'm pretty sure youd notice lol, my only other guess is that the diff has become lazy and you might just be able to re-shim and fix it.... Simple things first but, check the fluid. Mine was a bit funnny when i first got it and i found the fluid was low. Changed it to sme new stuff and it was fine after that

If you want to change it, I use Castrol SAF-XA (or something like that) its relatively cheap and does the job. Id recomend trying that first if it is the diff stuffing up

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • GCG is a good company, they're a major distributor for Garrett in Japan as well.
    • Nah, OEM washer bottle and brake fluid reservoirs are fine I don't know what it is with the plastic that Mazda used, some plastics, like the washer bottle and brake fluid res are fine, and still look new after 20 years use, where as the coolant expansion tank, and PS reservoir, that I replaced with new OEM items when I first got the car, turned yellow and started getting brittle a few years later If the dirty yellow stained plastics didn't trigger me there wouldn't be an issue, but they did, much like the battery bracket....... Meh As for going back to work full time to support car stuff, nope, why, because I own a Mazda NC MX5, not a Nissan R series Skyline 🤣
    • I've never heard of CJ-motor, so can't advise you on them. I'd just go straight to GCG for a GCG highflow though. Seems no point to use a middleman. I'm somewhat surprised that the price on the CJ site is lower than the GCG retail price. Even though CJ would get a discount of some sort, you would hardly expect them to give up so much margin. Maybe the price is out of date? Having said that "I'd go to GCG"...when I did my highflow, I went to Hypergear. I did this https://hypergearturbos.com/product/rb25dethighflow/#tab-dyno-results with the R34 OP6 450HP profile. With the BB centre (extra $400) and intially with the standard boost actuator, but I eventually got him to send me the high pressure one when I got to the point of being able to actually use it. Ends up costing the same sort of money as the GCG highflow, but this is, of course, the turbo that I KNOW has a shorter length core and so moves the comp cover rearwards. The GCG apparently doesn't do that. My mechanic also swears by the GCG highflow, given that we have another turbo rebuilder who does something essentialy the same as theirs, using Garrett wheels. He says it stands up at really low revs and makes good power. I haven't pushed my HG highflow past ~240-250rwkW yet (should have a little more in it, but unclear how much) and it does have a fairly gentle boost ramp. OK, it's much better now that I have gotten my boost controller tuned up on it.  A lot of my earlier unhappiness was because I couldn't keep the wastegate flap as closed as it needed to be (including some mechanical issues). I'd still prefer it to boost up nearly as quickly as the stocker, and it certainly a bit slower than that. So maybe the GCG one is worth the first look (for you).
    • Ok thanks 🙂 I will higly consider this. Any "known" company for a good reviews and experience to send that off? Is that CJ-motor good one? Or go straight to GCG site? I need to use VPN to even find some of those "shops" let alone access them 🙂 
    • You can literally put in as much WMI as it takes to quench the combustion totally (and then back it off a little, obviously), and it will keep making more and more power. The power comes from the cooling effect of the water (and the meth) and the extra fuel (the meth, which also has massive octane). It is effectively exactly like running E85. One might be slightly better than the other, but they are damn close. But with either you can lean on the boost or the timing (or both) waaaay more than with just petrol and the results are similar. Here's the first thing I googled for an anecdotal bit of evidence. Can't access the attachment without being a gold member, but it is there for the getting if able to, or searched up elsewise perhaps. https://www.hpacademy.com/forum/general-tuning-discussion/show/wmi-vs-e85/
×
×
  • Create New...