Jump to content
SAU Community

Recommended Posts

And WTF are they doing. 39.9% is not full, so it is rather irresponsible to lighten restrictions going into spring/summer...

The north south pipeline was switch on this year, so that's probably part of the decision

Edit: Ahhh yeah... what Greg said ^^^

The only thing stopping me from washing my car now is time :D Too freaken busy :O

You have listed a Supra / 300ZX / MR2, which are the cars you "did" have, you would be busy washing 3 cars on your own.

:(

You have listed a Supra / 300ZX / MR2, which are the cars you "did" have, you would be busy washing 3 cars on your own.

:(

Yeah, I need to change that :D Just refer to my sig for my car list.

You can now wash your car at home using a bucket or a high pressure cleaning device

- You cannot use a hose to wash your car

- You can of course use rainwater as you could under all stages of restrictions

This change has been made possible through a combination of factors:

- Melburnians commitment to water conservation the community has saved an additional 34 billion litres since the start of the voluntary Target 155 campaign. Melburnians have used just under 150 litres per person since the target 155 campaign commenced, a tremendous result.

- New sources of water are now on line and these add a new level of security and include the Tarago Reservoir and the North South Pipeline

- We have had much better rains. We had enough rain in Autumn to thoroughly wet the catchments and with the good winter rains storages are rising at over 1% per week. Currently our water storages are ~12% higher than the same time last year which equates to about six months consumption.

- Work on the new Desalination Plant at Wonthaggi is progressing very well, with completion still on track for late 2011. The desal plan will add another 150 Billion litres per annum which is about 42% of current annual water usage

I think if i hooked up my high preasure hose people walking the street would give me dirty looks just like when i washed my dirt bikes with it.. there like WTF ARE YOU DOING?!?! SAVE THE WHALES

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • There was a great one on Victoria Rd in Gladesville too back in the day. I can only assume GTSBoy is thinking of the mill up on the wollondilly, no restaurant there any more but they have restored the original steam engine on site and run it every few months, have an annual steampunk festival etc @The Bogan, you came to the wrong town for restaurants. we have a few reasonable asian and indian options but the Paragon is as good as it gets otherwise. That brewery is apparently just opened, been meaning to give it a go some time. The Highlands have plenty of fancy options but I suspect you are more a hearty eater than fancy eater
    • Thanks for coming back to post the update, maybe it will help out the next person!
    • Going by the intake & injectors I'd be guessing it's a DE, check the head casting number, should be 5L8 on a DET, 5L7 I think is the DE number.
    • For future reference, if you need to use Deutsch connectors but don't have the proper crimper for the round style pins, you can get regular style crimp pins too
    • No. The castings are all the same. As you have the inlet off, simply measure the diameter of the inlet ports and compare with the freely available on the net sizes of turbo and NA. The NA ones are small.  
×
×
  • Create New...