Jump to content
SAU Community

Recommended Posts

hey everyone just about finished my build and am stuck on some wiring, was just wondering if some out there can help it would be much appreciated

so i've got the 26/30 sitting in the car everything else is done just stuck on the aac valve wiring, now i got the r32 gtr engine loom and put it in and there is a 8 pin plug just before u get to the injector plugs that i have traced the aac valve wining to from the ecu, now from there i am guessing that there is supposed to be something that plugs into it and goes down to the aac valve and all the knock sensors and shit, i dont have that part.

how am i ment to wire up the aac valve???

can someone please post up some info they have and pics would be much appreciated.

thanks blocka

here's me engine bay

post-45830-1283260907_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/335056-r32-gtr-loom-into-r32-gtst/
Share on other sites

you are missing a section of the loom, unfortunately. you can either bodgey something up (hard without the plugs) or try and find one

For the record my r32 gtr idles happily at 1000rpm without even the vacum box etc. just the plenum (all holes blocked obviously) with standard ecu

thanks for the input JEFFWORLD2 but i would like to have it wired up,

yeah STATUS it would be the knock sensor loom \

if anyone has any pics of both sides of that 8 pin plug or any wiring diagrams that would be ace

cos i know that the aac valve has a signal from the ecu but dont know weather the other side is a 5v or an earth

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
×
×
  • Create New...