Jump to content
SAU Community

Recommended Posts

Ok selling a rolling R33 GTR shell, uncomplied at this stage, White car.

Parts that are missing:

Motor.

Centre '3-gauge' cluster.

Brembo brakes (has some other callipers on there for now, could be N/A skyline).

No so good points

Interior is average/rough, hence it would suit track/stripping.

Minor exterior damage to both rear 1/4 panels, not major and reasonably easy repair.

Did have a roll cage, so a few small holes in the floor

Good points

Car drives fine currently, gearbox is in good condition as are the diff's etc.

No major body work has been performed on the car far as we can tell (no hard hits).

Overall paint is ok

Other than parts missing above, car has everything else.

Has some aftermarket exhaust on it, stock suspension/cooler etc.

Price: $6,500 ONO (this is without decent wheels, just some shitters for transport).

Any wheels from the Import Monster SHOP (Click Me) can be organised for a reasonable price (possibly discounted), and final price altered to suit.

Shell still has a motor in it so it can be moved easily, will be removed @ time of sale.

Will ship/freight @ buyers expense.

Pictures: See post #5

If I don't sell it I will just part - majority out to mates, won't be many bits left for the general SAU populace unfortunately!

Contact via PM, if you have my number feel free to call & discuss.

Thanks.

Due to it having had a cage (since removed), there are holes in the floor plan - wouldnt be a major issue to fix though of course.

And the panel work required (rear 1/4's).

Missing brakes/motor etc

It cannot be complied as it is currently. If it was all fixed, then yes. If you wish to go through this then further discussions can take place surrounding that.

I'll have more pictures later this week, w/e.

This willl have to do for now but gives you a good idea of what needs attention, other shots would predominately show the rest of the car is pretty much ok.

NOTE THE CAR HAS NOT BEEN WASHED. Fair few of the brown marks are simply hand/finger streaks that will wash off.

The rest of the car is in gear nick otherwise. Only pictures below are of the issues really. rest of the interior is ok, same with the panels etc.

Right rear 1/4 panel / Left rear 1/4 panel, its just above the wheel arch, just a bit of bubbling under the paint

post-709-1283322880_thumb.png post-709-1283322905_thumb.png

Roof i think its minor surface in the pic, it could even just be dirt/bird shit.

post-709-1283322972_thumb.png

Interior

post-709-1283323003_thumb.png post-709-1283323117_thumb.png post-709-1283323038_thumb.png

Other pics.

post-709-1283323090_thumb.png post-709-1283323063_thumb.png

  • 3 weeks later...

Delete.

I just realised you don't have the Brembos after I made this post.

Would have been interested, if you ended up parting out the car.

:)

if you do part it out can I have the guard risers, bonnet hinges, front bar, reo bar and the side skirt parts that attach to the front quater panels

Mate of your gonna part it I need:

Front LH Guard

Radiator Support

LH Headlight

and possibly others....

If you part it please call me on 0405 382 754 - Himmy

Thanks!

Edited by HIMMY

This will be parted - Vic only at this stage as i don't have the time to post stuff around the place, least of all $50 parts.

Don't PM me until another thread is started. - I will post what parts are left over once i divvy it up to friends as stated earlier most of the car is likely spoken for.

Any PM's previously have been ignored given i clearly said the car wasn't going to be parted.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...