Jump to content
SAU Community

Recommended Posts

I'm guessing some sort of spraypaint is in order. But considering the under-bonnet temperatures, should I be looking for any particular type? Also, what can I do about the "NISSAN" logo? It looks pretty old as well. Can you buy new logos to stick on, or should I just paint over the whole lot?

I was gonna write up a guide in maintenance but never got around to it, but i did mine a couple of weeks ago.

To be honest, I'm not sure about the high temp stuff for that. I thought about it, felt it after a good run (can touch it, so its not over 100degrees). Its plastic, therefore I don't think it holds in as much heat as the metal engine components.

Anyhow, its not a gazillian degrees in there, so just used normal can stuff ($2.50 a can) because i couldn't find the high temp in gold. One can of standard primer, and one can of the gold. I used a stack of coats (a whole can, lol) which may also aid in heat protection. For my intercooler piping i *did* use high temp as that seemed much hotter than the plastic cover.

You prolly seen mine in my sig for a while.. came up well in the end...

http://www.skylinesaustralia.com/photopost...&cat=500&page=1

still looks exactly as good as that now, with no signs of bubbling, cracking, etc. But will see how well it holds up into the future.

Not sure about the sticker.. mine was still in good condition so I just masked over it, then used a stanley knife to cut to shape (see below photo). I think if you went over it, it wouldn't look as good

If they make the high-temp stuff in your desired colour you should go with that. The difference in the paint is elasticity which gives it the ability to flex as hot components expand and contract.

This cracks ordinary paint after a while.

Are you sure your logo is stuffed? Try buffing it with some brasso to remove surface scratches and ingrained dirt.

Ta for the info guys.

No I'm not sure my logo is stuffed, but I think it had a few chunks of paint out. I'll have to take another look to be sure.

Also I have heard that some people polish the cam covers and sell them with exchange of your old ones for a reasonable price. Does anyone know anyone that does this and how much it costs? Is this something you can do yourself? I've got a drill which I think takes a polishing attachment. What exactly would I use to polish it?

Not sure if this will be an issue, but do you think the paint might help keep the heat inside where the coilpacks are?

I think it should be OK as long as you don't use the heat reflective stuff maybe ??

The last thing you want is to trap the heat in the coilpacks cause it will eventually stuff them up :(

J

Hi.

I did mine when I had the R32.

If you are going to spray anything in the engine bay, make sure you use ENGINE ENAMEL. Otherwise the paint will eventually peel off and look crap.

I polished the rocker covers when I had it.

Took a good 4 hours (all up) and a sore arm.

You MUST take them out of the car to do a decent job.

to do mine, I sanded it back to bare metal then went lighter and lighter with the sand paper down to about 1400 grade sandpaper with oil as lubricant.

then I polished it up with AUTOSOL metal polish until I could see my face in it..

A few pics can be seen at.....

http://www.pbase.com/image/22963789

http://www.pbase.com/image/22963790

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
    • You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
    • On the bright side, the weather will turn much nicer for working outside shortly....sounds like you might need to start on a neighbour's garden next
×
×
  • Create New...