Jump to content
SAU Community

Recommended Posts

hi all, just wondering what gbox oil were running out there,

im getting a gtr box, the dude said it was starting to crunch occasionally 3rd to 4th at like 8000rmp... (dont ask :S)

ive heard good things about redline shockproof and royal purple.

with the redline would i want a heavy or light?

seems like 75w 90 is a common thickness.

thanx all :D

Edited by chef_stagea
Link to comment
https://www.sau.com.au/forums/topic/336278-gearbox-oils/
Share on other sites

hi all, just wondering what gbox oil were running out there,

im getting a gtr box, the dude said it was starting to crunch occasionally 3rd to 4th at like 8000rmp... (dont ask :S)

ive heard good things about redline shockproof and royal purple.

with the redline would i want a heavy or light?

seems like 75w 90 is a common thickness.

thanx all :D

if you're getting a gtr box and u know it has issues, then why not fix the problem rather than applying a band aid?

shockproof does root synchros. good for straight cut/dogboxes but BAD for gtr stock boxes

do yourself a favour - take the box to a trans workshop, get the synchros fixed and check out the gears for stress

-D

Link to comment
https://www.sau.com.au/forums/topic/336278-gearbox-oils/#findComment-5439919
Share on other sites

I always have heard NOT to put shockproof in because it ruins syncros.

Im running Castrol Syntrax 75w90 in a RB25 box.

I've been told the same thing and read it on forums. I spoke to Shaun at Boostworx only yesterday (want to do both diff and gearbox) about this and he's assured me that this is what they use and recommend for gearboxes.

Link to comment
https://www.sau.com.au/forums/topic/336278-gearbox-oils/#findComment-5439987
Share on other sites

I've been told the same thing and read it on forums. I spoke to Shaun at Boostworx only yesterday (want to do both diff and gearbox) about this and he's assured me that this is what they use and recommend for gearboxes.

I'd rather believe a pro, than forum 'experts'.

:cool:

Link to comment
https://www.sau.com.au/forums/topic/336278-gearbox-oils/#findComment-5440000
Share on other sites

I'd rather believe a pro, than forum 'experts'.

:cool:

Same. My mechanic however said the same thing as forum experts about the Shockproof (aka smurf poo) - said its notorious for wearing out synchros and then explained to me why

And considering how shagged my box is, I'm not surprised. Been using good quality mineral oil since and while I do have issues with the synchros, it hasnt gotten progressively worse

Even Redline themselves say on the website 'not to be used with synchromesh gearboxes'. so yeah. believe the company or believe the tuner? I know shaun knows his stuff but I personally would never use it

-D

Link to comment
https://www.sau.com.au/forums/topic/336278-gearbox-oils/#findComment-5440027
Share on other sites

I have got redline shockproof lightweight after trying the castrol in my r33. It didnt fix the crunch from 1 to 2 but it did make it alot better. It only has a slight crunch every now and then

Link to comment
https://www.sau.com.au/forums/topic/336278-gearbox-oils/#findComment-5440114
Share on other sites

After asking around about the shockproof stuff, sometimes it can be too thin, and feels like there is is no "resistance" in the gearbox, almost "too quick".

Ive got some Castrol Syntrans 75w-85 in my 20 box, feels nice.

Link to comment
https://www.sau.com.au/forums/topic/336278-gearbox-oils/#findComment-5440841
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
×
×
  • Create New...