Tomei R34 Gtr Dumps Fit R32 Gtr?

[Kaido_RR]

Hi

Just need to confirm if tomei r34 gtr dumps fit an r32 gtr?

i'm pretty sure they are the same just the r34 has a hole for a sensor or something?

[R31Nismoid]

Of course they do.

They don't make specific bolt-on turbos for R32 or R34's

Only difference is the O2 sensor.

[Kaido_RR]

Of course they do.

They don't make specific bolt-on turbos for R32 or R34's

Only difference is the O2 sensor.

so does that mean i need to get 34 o2 sensors?

[James_03]

so does that mean i need to get 34 o2 sensors?

No, you need to do what I did and run adapters.

33/34 are zirconia sensors, 32 is titania only. Some people think you can use zirc's for the 32 and get away with it, but there are differences.

My mate made me adapters on a lathe, but I have seen them before on other dumps. Go to an exhaust shop and see what they can do.

[ezy_09s]

Or do what i did and take out the R32 bungs from the standard dumps, machined the threads off on the lathe press them in the R34 dumps & tigged to the r34

oxygen sensor bung..it only adds a couple of mm of height to the stock r34 bung because the top of the r32 bung is stepped down.

Only took 20 mins to mod them & cost zero..and sensors plug back in like standard.

Edited September 14, 2010 by ezy_09s