Jump to content
SAU Community

Recommended Posts

anyone with a aftermarket FMIC on their m35 ...what was the dimensions you used without having to butcher the front bar to buggery?

and was that a relatively easy fit?

Doesnt need to be huge. infact id rather it quite thin but long. Anything has to be better than the standard one on there.

any feedback on dimensions would be great so i know what to buy before tearing the front bar off.

cheers

keir

Link to comment
https://www.sau.com.au/forums/topic/336689-m35-fmic-dimension-limitations/
Share on other sites

anyone with a aftermarket FMIC on their m35 ...what was the dimensions you used without having to butcher the front bar to buggery?

and was that a relatively easy fit?

Doesnt need to be huge. infact id rather it quite thin but long. Anything has to be better than the standard one on there.

any feedback on dimensions would be great so i know what to buy before tearing the front bar off.

cheers

keir

Mine has a 600 x 220 core now I modified it, bolts under the bar, just.

Most of the guys run a standard 600 x 300 but you have to remove the thermo fan and replace it with a thinner one, core sits behind the bar.

I used to run a 450 x 300 which fit beside the thermo fan motor but it wasnt ideal.

There is enough width to run maybe 800mm if you really wanted but you are stuck with standard core sizing usually.

yeah i was thinking something along the lines of this.

but its a bit short.

http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...e=STRK:MEWAX:IT

you reckon its feasible?

or should i go something longer and thinner?

Best cooler will be a 600 x 300 x 76 and a thinner fan, The HDI kit would be the go if you have the coin. All the piping is plastic and will need to be changed so factor that in.

Do you have a power goal? Mine keeps raising... ;)

Best cooler will be a 600 x 300 x 76 and a thinner fan, The HDI kit would be the go if you have the coin. All the piping is plastic and will need to be changed so factor that in.

Do you have a power goal? Mine keeps raising... ;)

I've got the HDI FMIC kit....no complaint's and easy to install yourself....big improvement over the standard one especially in summer.

yeah i was thinking something along the lines of this.

but its a bit short.

http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...e=STRK:MEWAX:IT

you reckon its feasible?

or should i go something longer and thinner?

If you want one that will fit nicely under the reo, maybe look at this Trust unit?

http://cgi.ebay.com.au/TRUST-GReddy-Interc...9#ht_1694wt_911

Is looking more and more like the way I go and get some 1-piece mandrel bent inlet and outlet piping done locally.... will have to make up your own brackets though

But then again, I am not going for 300awkw

Edited by iamhe77
hrm i can afford the HDI kit... is anyone still supplying them.. i saw danny or someone in another thread was making up kits or am i mistaken?

You'll have to contact Josh (I think?) at http://www.hybrid-power.com/index.php]HDi

02 9620 7388

[email protected]

Edited by iamhe77

Hey mate,

For a little variety I went the Blitz CS FMIC kit for the M35 from Just Jap. Cheaper than the HDi unit also (last time I checked). It was $999 + around $50 postage to the Gold Coast. If you would like to see it/drive it, come on down.

Blitz FMIC

Core Size - 620 x 266 x 76mm. Only the reo bar had to be cut back a tiny bit. Could not be happier though.

Cheers

PS: Glad theres more M35s in Qld now.

Hey mate,

For a little variety I went the Blitz CS FMIC kit for the M35 from Just Jap. Cheaper than the HDi unit also (last time I checked). It was $999 + around $50 postage to the Gold Coast. If you would like to see it/drive it, come on down.

Blitz FMIC

Core Size - 620 x 266 x 76mm. Only the reo bar had to be cut back a tiny bit. Could not be happier though.

Cheers

PS: Glad theres more M35s in Qld now.

You cut back the alloy reo? How is the air going to flow to that part of the cooler? Maybe you should have put a thinner fan on instead.

You cut back the alloy reo? How is the air going to flow to that part of the cooler? Maybe you should have put a thinner fan on instead.

I had just replaced the fan with a new OEM one so I was not going to do that again. Plus, it was my Mechanic who did it without telling me prior to him installing it. Sucks to be me.

Hey mate,

For a little variety I went the Blitz CS FMIC kit for the M35 from Just Jap. Cheaper than the HDi unit also (last time I checked). It was $999 + around $50 postage to the Gold Coast. If you would like to see it/drive it, come on down.

Blitz FMIC

Core Size - 620 x 266 x 76mm. Only the reo bar had to be cut back a tiny bit. Could not be happier though.

Cheers

PS: Glad theres more M35s in Qld now.

hmm... Hdi's kit should set you back around the $800 mark. Can't remember if that included shipping or not though.

Also, the HD' GT2 core is significantly more efficient than the Blitz unit

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
×
×
  • Create New...