Jump to content
SAU Community

Recommended Posts

id never thought about it that way. so the air coming in through the rad escapes throught the front of the bonnet meaning no air flows throght the rest of the engine bay?

and we also had the bonnet spaced up to clear the cooler piping so that didnt help.

No after air passes thru rad it then either travels down side of engine & downwards under the car by firewall or upward to the rear of the bonnet. My understanding is that it travels downward & under the car

I had a car (32 GTR) from japan with the rear of the bonnet spaced up. I thought it was a bit gay and everyone always thought my bonnet didn't close properly. when i got the chance I removed the spacers. temps definitely went up a bit. so yeah it's doing something. no doubt base of windscreen is a high pressure zone so maybe it's ingesting air through there and helping it force the other engine bay air (from the front bumper ducts) down the trans tunnel (which is where engine bay air escapes in a factory standard car with no bonnet venting)? I haven't studied it enough to know for sure but it's possible.

I had a car (32 GTR) from japan with the rear of the bonnet spaced up. I thought it was a bit gay and everyone always thought my bonnet didn't close properly. when i got the chance I removed the spacers. temps definitely went up a bit. so yeah it's doing something. no doubt base of windscreen is a high pressure zone so maybe it's ingesting air through there and helping it force the other engine bay air (from the front bumper ducts) down the trans tunnel (which is where engine bay air escapes in a factory standard car with no bonnet venting)? I haven't studied it enough to know for sure but it's possible.

function over fashion it is then.

i'll be the guy in the paddock with the riced up purple gtr. come and say hi.

well the only other thing I'll say is russ and mark do test what they do. I'm sure if it wasn't working they would have put it back. I know average temps were noticeably higher when I removed my spacers without any other change.

if nothing else just give it a go. it costs practically nothing and takes only 20 min or so to remove and replace the bonnet. with some mates to help you can just fit one side at a time which is even easier. get a temp probe under there somewhere, or just log oil and water temps over a session, then do the same with/without the spacers. if results look good, keep it, if not back to standard and back to head scratching!

will definitely come say hi and then ask you if you realise that your bonnet is not shut properly... lol :rant:

from memory mine were about 15mm maybe 20mm and I think there were longer bolts too as I seem to remember when I removed the spacers the bolts were too long. washers and longer bolt are fine. if you find it's beneficial you can always machine up a neater looking spacer later on.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...