Jump to content
SAU Community

Recommended Posts

Ive got a few bits and pieces left from my previous setup that could pretty up someones engine bay.

2xTrust Filters

2x SS Intake pipes

1xAluminium y pipe

all joiners and clamps in picture that are necessary for a direct fit.

most of these bits have been made by briffa engineering so work is top notch.

Like i said in the title, this kit is off my old hks2530 so im not sure if it would fit a stock gtr, if someone could clarify that would be great.

Price; $400

D

post-68628-1284439716_thumb.jpg

post-68628-1284439694_thumb.jpg

i am assuming that would be your way of saying the price is too high.... (needless to say that was completely unnecessary)

Im open to offers, however this is not an ebay kit and please consider how much these things cost to make.

would the intake gear fit a 32gtr with -5's i wonder?

Yes it would. Same turbos.

Price is good, whatever it looks like.

GL with sale OP.

  • 4 weeks later...
Were you running AFM's with this setup? Keen if so.

afm's can be used i forgot to mention in the sms... just need one extra silicone joiner i believe and the filters would sit on afm's, having said that i have never used them so if anyone is interested in trial fitting before they consider buying this they are more than welcome to do so.

I am not too sure mate, the mounting position would be the same, im just not sure about the flanges, i can measure it up and let you know if you like.

Hi, Mate, there is one dump pipe and the Y pipe ( front pipe ) in the pic. Are these included in the package?

Alex 0433 878905

pm's and sms'd those interested.

I apologize for not making my original post clearer.

The kit includes the intake section only. not the front y trust pipe and the hpi dumps.

It includes the split intercooler pipe (not front y pipe for the exhaust -> dumps section).

So it basically replaces the stock intakes and filters and pretties up your engine bay =).

Hope this clears things up a little.

regards

D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
    • Welcome mate. Any pics? Even with a DE I'd be well happy if I had that as a 1st car. 
×
×
  • Create New...