Jump to content
SAU Community

Recommended Posts

hey guys, had an accident last week.. got cut off on highway and hit barrier at 110km/h.. got out of it ok.. i think my air flow meter may be screwed.. it idles fine just once you come on boost it starts missing pretty bad.. almost like its actually running on 5 cylnders.. sounds like a wrx.. well a sick one! anyway i got home and let it idle for a few seconds and thought i heard a wierd sound.. so i take off the pod.. and put my ear up to the air flow meter..and sure enough.. i hear a little sound.. sounds like a bell!!!! WTF! like a little bell just ting.. ting.. etc.. is my turbo on its way out.. the car still felt pretty strong before the accident and i have never noticed this sound b4? any one know anything? any help would be great. by the way this is a rb20det.

cheers.

Link to comment
https://www.sau.com.au/forums/topic/33702-weird-noise-from-turbo/
Share on other sites

:upurs: nah, its funny because you drive down there pretty much any day and see all these cars that have like hit the side barrier, and its like 5 lanes and so open wide viewing angle the whole way to the GC and everything.. it makes the Monash and Ring roads in melbourne look like narrow roads so i'm not sure people manage it!

Thats some nice whoring.

I'd take it to a profesional for an opinion. Maybe pull the af meter off and havea look to see if anythings loose in there, check wiring hasn't been crushed in the inner guard if the car was an auto before the conversion.

Probably pull the front pipe off and have a look in the turb to see if you can see any chips in the blades and have a feel for play in the shaft. BB turbo should have very little shaft play.

Unless somethings fallen off the af meter then the turbo shouldn't have eaten anything though.

.. i was heading into brisbane, in the left lane and some **** head decide to take my lane.. he was going quick and there was a car ahead of him.. so he cut me off.. predator.. before you open your uselss mouth about shit you dont know nothing about go to your kitchen and get a glass of shut the hell up.. call me a fool for running into the barrier.. f**k you! bhdave, DJ_L3ThAL thanks for the replys.. ill have to pull the turbo off and check it out.

Just take the pipe from the compressed side off and look for "shiny bits" first. May save some work.

remember a turbo spins way quick so if it was interfering anywhere it would sound like a squeal

"interfering...squeal" sounds like gordo and DJ with their 14 yo :)

took everything off bar the turbo and there doesnt seem to be any signs of anything. the turbo wheel spins freely and there is no metal shavings.. there is very little play in the turbo as well.. hmmm.. but i guess when its spinning as fast as it would when i come on boost if there was a tiny bit of play it would get worse????

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha I do that.. thats when it chirps..The bit point for me is almost non-existent. Otherwise I stall it. But yes, in terms of performance, the clutch is solid af.
    • Greg speaks wisdom. These dirty old Datsuns are only value when they are cheap. When they are not cheap, there is no value. Sounds contradictory, but it's true. We are now 20 years past the hey day of modifying cheap 90s JDM cars for small amounts of money. This is a different world. If you are rich and can afford not to care about what is effectively wasting money on an old Datto shitter, then I have no reason to argue against it. But if you are wanting to experience what we all experienced back in 2005 (and I bought my car last century!) then there is no way to do it.
    • Short answer: No. Medium answer: No, because you still need to conjure the things out of thin air to bolt them to a NA to make it a NA+T. Long Answer: No - The things you need to conjure - meaning a turbo, intercooling, manifolds, exhaust, intake/manifold/piping, clutch, injectors, fuel pump, AFM (?), ECU + Wiring (woo, N/A loom fun) have to come from somewhere. You could have many scavenged these things from an OEM car that someone had upgraded from and use some of these. This will be cost prohibitive now, especially so in the USA. You'd probably pay the same for newer, upgraded components that are better than old OEM stuff from 25-30 years ago. None of these big ticket items are re-usable for the N/A car. Why not buy new and upgrade while you're there? The only real consideration is turbo and fuel sizing and determining whether you want to stay within the bounds of the OEM engine or get into rebuild territory. These limits ARE lower with a N/A motor and especially N/A gearbox at the starting point. And if you're gonna upgrade those then you may as well consider having them built to begin with. Because everyone here knows you're never far from that next engine rebuild once you start making the power you want... The cars you see on the internet and SAU etc have been built over decades. If you're really clued in... you would sell your US car to somebody for what you paid for it. You would then scour AU JDM pages or SAU and buy a car like Dose's on this forum with your powerful American Dollar. This will save you so much money in the long term. Importing it could be tricky. Or it might not because USA. I have long said the only reason 90's Japanese stuff took off was because a) Japanese people had Japanese cars so that is what they used b) Australians could import these cars to Australia with very minimal changes and use them on the road here c) Neither country had well-priced access to US or EU Sports Cars. I don't believe the JDM scene would have taken off in Australia at all if we had EU priced EU BMW M offerings, or more especially the AUS V8 Scene would never have existed if we had the multitude of US cars like Camaros, Mustangs, Corvettes at the prices you folks do. After all - Do the math. I would say put a V8 in your R34 and that's the smart way forward. It is. I did it. I know this from my own experience. But at that point there's no reason to simply not buy a C5 or C6? It would be simpler and easier and cheaper and bette-
    • Reading all this... hurts lol. I have an ENR34 5MT and I paid an inflated USA price for the car alone, had to do tons of preventative maintenance past that, and so I'm over $30K USD into the car already and haven't even touched power.  I wanted to +t it. Not even trying to make GTR numbers, I'd be happy with 250hp.  Can I get away with paying much less to make that happen?
    • Damn you’ve done well, definitely snapping necks.
×
×
  • Create New...