Jump to content
SAU Community

Recommended Posts

Ive installed mine on the 34 but for some reason, the Bass noise from the rear speakers are not hooked up. The standard rears have pretty good bass but when i installed it, there is noise but no bass. Then I somehow wired up 1 extra wire and it came on but only up to a certain level then it would cut out!??

Can anyone help? :headspin:

Link to comment
https://www.sau.com.au/forums/topic/33715-anyone-installed-a-stereo-in-r34/
Share on other sites

what components have u installed? like h/u, amps, speakers, subs etc?

and where did u find this "1 extra wire" from?

and i've love to see some pics if possible - cos i just bought an R34 aswell, and will be planning to install my full sound system in very soon [hopefully]

yeah make sure all the wires are connected properly [positive-positive; negative-negative].

but i wouldnt think that phase cancellation would cause ALL the bass to 'disasppear'. but i cant think of any other reason why it mite be doing that...

no... all the wires were right... normal 4 wires for the rear speakers.. Then noticed there was absolutely no bass from the rears. Connected another wire to one of the positive or negative wire and bass came on!! But when its too loud, it cuts out??? So i have to keep it at a medium level.. Still cant work it out.

ANY IDEAS?

it sounds like youve got a wire being earthed or it's cutting out,. i had this problem once when me and a friend installed a head unit in my old vl. one of the wires was touching on another and the sound was shit and lacked heaps of bass it would also cut out going past a volume of like 10 out of 40. we found out one of the speaker wires and touching another bare wire and causing it do wierd stuff.

also the speakers will share a common wire, check you've hooked this up properly too

  • 10 months later...

You dont need to remove the centre consol.

From the begining for those that dont know...... remove the ashtray, there is a screw behind the ashtray. Now you can remove the shifter surround. It just lifts up. Now at the bottom of the stereo facia are two screws, remove them. The next part, if you use a screwdriver you can damage the dash. Use a paint scraper, put it down the crack between the dash and heater controls and wedge out the heater controls. There are two screws behind them holding the facia on. Remove the facia, unplugging anything that has to unplugged. Now unscrew the 4 screws holding the stereo brackets in. Unscrew the stereo and your new one will line up perfectly with the factory holes in the brackets. You do not need the cage so dont cut the facia and try and use it. Like every other nissan, you will be left with a small gap around the stereo. Your local audio shop may sell a trim for this. We sell them at work for $10. Or wrap a piece of velcro arouund the stereo ( just the fluffy side)

As it says in the sticky about redrilling the brackets to make that trim fit.... ignore it. A very rough and incorrect way of doing it, also very time consuming! If ya have any questions, feel free to pm me! :rofl:

BADHAB|T, Thanks for that info! :P

let me get this straight. Allyou need to remove are:

1. The gear stick surround, and

2. The stereo surround which is attached to together with the heater surround.

(Just wedge it out between the heather console and the dash surround).

Right?

NJR 34GTT : bang on man! Excellent step by step guide!

gaki : no worries dude! The vents are seperate NOT the heater controls, the heater controls are attatched to the stereo etc. (sorry for the mixup, been a while since I worked on an R34) The vents wedge out which exposes 2 screws holding the stereo facia in. Check out the link NJR posted, its easier to see it sometimes.

Oh, once you have mastered your car you will be able to do most Nissans! They all come apart in a very similar way. :D

Also, to wedge the vents out, ont use a small screwdriver as shown. You can dent and damage the dash. Use a paint scraper or something similar.

I'm about to install speakers into my car.

Do you have to remove the rear parcel shelf to do the rear speakers??

I want to fill the under side of the shelf with dacron at the same time, I'm wondering if this is going to be any good??

cheers

BASS OUT

Yes, but like every Nissan you have to remove the rear seat to be able to remove the tray (Except Nissans where the back seat folds down).

No, use proper sound deadening sheets, that fluffy stuff doesnt do nothing.

The idea is to make the tray as solid as poss to eliminate rattles but also making it more solid means less energy is wasted in vibrations, therefore making the music sound better.

Thanks Badhabit.

I have previously had the black deadening stuff in the front doors of a VS Calais and it made quite a difference.

I guess it's not a hard job to put the deadening black stuff on the back steel shelf, but how do you put it on the parcel tray itself??

Cheers

BASS OUT

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • (it is a brand new ported mellings pump) I suspect the lack of pressure is due to the leak. It was *not* that low in other logs of oil pressure in the past. It wasn't that hot either, but not far off.
    • Would a Mellings oil pump be a viable option  From my time with a LS, and talking to tuners and LS specialists, the "weak" OEM oil pump is one of the first things they recommend to swap out if I was going to give the engine any high RPM I opted for a Mellings high volume, with the high pressure springs and I never had a issue with it Cost wise they are not expensive in the scheme of things 
    • Just bought a 2002 Stagea 250tRS VR-X Four AERO VQ25DET and spent the last two weekends cleaning and detailing it.. still have to do the wheels and the engine bay but the rest of it came up nice. Imported 2011 to S.A. and I'm the third owner since it was imported. I met the guy who brought it over, he went to Japan and picked out the car, bought it and ordered the wheels. He also gave me a list of stuff he did to the car with receipts. Coil overs (I have the original springs), 3" exhaust from the dump pipe back no cat, Custom dump pipe,(I have the original exhaust), Plenum spacer, 18" custom Work XSA wheels (need restoring, I've made a start..), Shift kit put through the 5 speed tiptronic auto, TV and menus/screens changed to english, Australian DTV tuner installed in rear. I've just had four new discs and new pads as well as all the fluids including the brake fluid replaced. I have all the receipts for the last 15 years and the import papers in a nice folder. Car looks great, goes like hell but fuel economy is not a thing lol.. pics next..
    • I ended up in this rut again lol, and used a shit ton of filler. One thing I can't understand is, even after using a big long block and going in long X pattern strokes, I always end up at bare metal again with no filler, and my repair started at one end of the door and now I've chased my tail to almost the other end of the door. I was thinking of hitting the panel with a hammer where it might be a high spot and making everything low then filling it, I did this on a small section on my other door by mistake and I think I fixed it lol. Is this a bad idea? The other thing is with guidecoat, whether it's the powder or spray, after I sand all the guide coat off, it doesn't reveal anything for me in terms of high spots and low spots and makes it especially hard when it's bare metal (at least in powdered form), am I doing something wrong here, or likely a high spot I keep going over and creating valleys? Lastly, stupid question but, is it possible that after sanding if I only sand over the filler area where I know to be a dent that it's impossible for me to dig into that dent? Unless there are other problems which I missed.  
×
×
  • Create New...