Jump to content
SAU Community

Recommended Posts

Gday lads, thought id give a quick report on how i went with this mix

So methanol was $260 205l drum, bp98 $1.?? a litre. and with e85 costing us $550 for 205l here in perth i thought it would be worthwhile giving this ago.

result was 560hp at 21pounds and we ran out of fuel system, as an idea we ran 527 at the same boost level.. but the methanol mix picked up through the middle

would i do the methanol mix again.. probably not, will just finish of this drum and will be trying e85 next

and just so you guys know methanol is poisonous and corrosive it is illegal to be used on the street, even mixed with the petrol it is a very strong methanol smell when burning

details on the build

R32 GTR

ENGINE

built engine

stage 2 hks 272 cams

hks cam gears

TO4Z Garrett

6 boost

48mm turbo smart gate

twin z32 afms

fuel system

sx fuel pump,surge tank,-8 lines

1450 fuel injector clinic

sard reg

Link to comment
https://www.sau.com.au/forums/topic/338301-methbp98-mix/
Share on other sites

Why did you go Methanol instead of Ethanol?

I can not see any advantages...

was sittin with a good mate that runs methanol in his burnout car and after a few discussions and some research we thought we'd give it a go..

plenty of positives for it lad(e85 in perth is $2.68 per litre my methanol/petrol mix worked out at $1.35 a litre half the price and just as much power potential), unfortunately for me it didnt go as planned, i underestimated the fuel system required.at a guess if i ran another sx pump and some id2000's i have no doubt we would be seeing over 650.BUT i am pretty sure if i run e85 with the same setup i have now i will have the same issue with not enough fuel system..

e85 50% 50% bp like you have used is probably what i will try next, if it doesnt perform the way i want i will upgrade the fuel system too a monster setup

my setup is methanol safe ie. i run a seperate fuel cell in the boot, all lines are teflon, pumps are meth safe, injectors are meth safe. and also this car is not a street car, it isnt even licensed, i would not suggest for anyone to use this type of mix if they were planning on driving it daily or were not prepared to flush the system and store the fuel correctly.

Link to comment
https://www.sau.com.au/forums/topic/338301-methbp98-mix/#findComment-5467761
Share on other sites

  • 2 weeks later...

Ran this tune around the track at powercruise for the weekend.. very impressed, feels much stronger through the whole rev range compared to my pump tune.

anyone ever done this mix and successfully made power? any fuel system guru's that could tell me what i need to upgrade to reach my 26-27 psi boost level?

or could the methanol be reduced and the bp increased? what sort of effect on octane does this have?

will still be giving e85 a shot but just curious to give this another crack too..

Link to comment
https://www.sau.com.au/forums/topic/338301-methbp98-mix/#findComment-5480834
Share on other sites

the engine bay wiring was the least of my worries tryin to get that car to powercruise man :thumbsup: haha we were still adding terminals to the main battery terminal on saturday morning!! mostly fuel system sh*t, that will eventually be hidden to a junction box somewhere.. yeah was lookin for ya on the cruises, but we were never on the same cruise eh.. saw brockas in my mirror once coming down to the main straight and was hopin for a run.. but he wouldnt come play!! he may have been leavin track or something.. anywayssss

e85 will happen.... but i have a drum of methanol i have to do something with :D

Link to comment
https://www.sau.com.au/forums/topic/338301-methbp98-mix/#findComment-5480901
Share on other sites

http://www.skylinesaustralia.com/forums/E8...80&start=80

old news but is a alternative for E85 if you cant get it somewhere.

yeah been following that thread too trent!

Its a convenience thing for me aswell, for example last weekend i was at powercruise here in perth and camped up with some of my v8 mates who run on methanol, so there was plently of methanol to go round..

at the end of the day, i dont drive this car on the street.. and its as simple as undoing and switching two -8 fuel fittings from cell to main fuel tank and flushing with pump 98.. for long term storage.

another thing people may be interested in.. after running 180litres of this mix, my oil is still fine.. i was concerned about it milking up but have had no issues YET.

Link to comment
https://www.sau.com.au/forums/topic/338301-methbp98-mix/#findComment-5481859
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...