Jump to content
SAU Community

Recommended Posts

Hey guys! need some advice / help! got my car serviced recently and ever since then the car has been running pretty crappy! I cant figure out what it is, it runs fine mostly, but when i let go of the throttle i can feel a vibration coming through the car, can feel it through the drivers seat and through the foot rest where the clutch would be (cars auto), that whole left side vibrates, not dramatically, but enough to notice easily. It seems to get worse on lower revs and i can't figure out what it is, coil packs and plugs are fine, car was running fine before the service. The car doesn't sound the same as it used to either, seems to be more quieter than normal on idle and as i said when i rev upto like 2K and then slowly let og of the throttle i can feel the car vibrate and then become stable again, really weird! HELP!

car: R33 Gts-t Auto

mods: turbo back exhuast, Pod, R34 Side mount, bleed valve boosted to around 9-10psi and SAFCII tuned by RE customs

what the service guys did:

change plugs

change belts (not the timing though)

oil change

auto transmission fluid change

thanks!

Link to comment
https://www.sau.com.au/forums/topic/338355-vibration-shaking-from-egine/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I thought Australia got rid of the "drag dodgy fuel up to 91 RON with ethanol", which is why all E10 advertise as "up to 94 RON" ? Anyway I put E10/91 in the missus' Mazda because she empties the tank weekly, when all my cars get 98RON. tl;dr - turbo - 98 RON, if you can't afford that, sell it and get a commuter car (or tune your car for 91, which no one does).
    • Yeah i found that alot of parts can be wrong or "very" hard to get the real right one. I already bought some brakes years ago on me "old" GT calipers and they were wrong too 😄  I told them too. Even send them pictures...but they said "EBC catalogue has them on my car... So i dont know what their answer will be. I call monday them and let them know that they are really not on my car. If they were they would be already on a car...
    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
×
×
  • Create New...