Jump to content
SAU Community

Recommended Posts

Hello everyone,

Im selling due to life throwing a curve ball. I require a new vehicle for an up coming job. I already have one lined up, so NO TRADES.

I have receipts for all purchases, minus items purchase via Private Sale or Forums. But I do have a list of everything purchased+prices.

Contact: 0414 595 397 or PM

Price: $16,500 with RWC

Location: GOLD COAST

Can and will post more pics on request..........

Note: Plates are not included in the sale.

Currently Street Tuned for economy. Gets 550-600km/Full Tank.

Upon Deposit and agreement, the Buyer may request any further adjustments to the vehicle;

-Ride height

-Re fit Air Box, BOV etc

-I can also organise a complete tune.

Comes with Spares: Air Box, Factory Struts&Springs, Control arms, BOV, Grille

Make: Nissan

Model: Stagea WGC34

Year: Nov 99'

Engine: Neo RB25DET

Drive: AWD Triptonic - SemiAuto

KMs: 88,XXX

Spec: Full Lux RSFOUR

Rego Expires: Jan 11'

This one is FULLY OPTIONED

-Complete DAYZ KIT

-Duel Sun Roof

-Leather Seats

-Heated Seats

-Rear Seats recline

-Plush Floor mats (VERY rare)

-Boot mat (rare)

-Cargo net (rare)

-Stainless 'style' Door sill trim (EXTREMELY Rare)

-Suede Door cards

-Wood Grain 'style' trims/steering wheel/switch surrounds

-FACTORY Xenon headlights - Height/Angle adjustable

-Oil + Filter Serviced EVERY 5,000km

-Coolant flushed + changed approx 15,000km ago

-Brake Fluid flushed + changed approx 15,000km ago

-Brake Rotors + Pads approx 25,000km ago

-Transmission had a service when I had the Shift Kit installed approx 5,000km ago

-BFG Goodrich G-Force Tires approx 10,000km ago

-Wheel balance + rotate approx 20km ago

**Engine:

-NisTune (Type 4 Board)

-Custom Turn Flow Intercooler - (Street legal)

-Black Silicone pieces (for a stealthy look)

-K&N Pod

-Cold Air Induction

-GReddy Profec Bspec Boost Controller

-Full 3" Turbo back Exhaust

-High Flow Cat

-Twin Core Copper Raditator

-NGK Iridium Spark Plugs

-Turbosmart V-Port Bov

-New Cam Cover Seals

-Custom Catch Can

-Custom Stainless Cooler Piping

**Transmission:

-Custom Shift Kit (was serviced at the same time)

-Relocated Trans Cooler

**Brakes/Suspension:

-R34 GTT Front Calipers

-R34 GTT Front Slotted DBA Rotors

-R34 GTT Front HD Bendix pads

-R34 GTT Read Calipers

-R34 GTT Rear Slotted DBA Rotors

-R34 GTT Rear GCT Bendix Pads

-Genuine Japanese Tien Coilovers (Front 6kg/Rear 6kg)

-D-Max Rear Adjustable Camber Arms

-D-max Rear Adjustable Toe Arms

-Whiteline Rear Swaybar (R34 GTR)

-New Front CV Boots (Both Inner and Outers)

**Exterior:

-HIDs (Fog lights)

-Genuine Clear Nismo Side Indicators

-Non-Turbo Grille (Looks VIP)

-17x9+35 Drift Teks - Silver with Machine Lips

-BFG Goodrich G-Force Tires

**Interior:

-Defi Water Temp Gauge

-Defi Boost Guage

-JVC Head Unit

-14% Tint on front windows + Windscreen Strip

-Red LEDs behind Cluster (everything is RED)

-Bright White LEDs in the Interior Lights

00000000000001.jpg

_DSC0106.jpg

_DSC0166.jpg

_DSC0133-1.jpg

post-65996-1285845211_thumb.jpg

Honestly Just posting to see what happens here,

the look of this car is making me fall in love with C34's again.

I need approval from work to get a Wagon!

Honestly Just posting to see what happens here,

the look of this car is making me fall in love with C34's again.

I need approval from work to get a Wagon!

I'll help you talk Cazz into it!

Thankyou for the compliments :D

I shall get around the interior pics tomorrow ASAP!!!

I was ment to take some more pics today but the weather was looking abit... Blah!

Stay tuned............................................ :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...