Jump to content
SAU Community

Recommended Posts

So just a little tale of my days work - and a warning to those doing the seafoam-esque treatment....

I had just finished cleaning out my whole intake system of sludge and gunk, including the throttle body and AAC valve. The car idled perfectly again this morning and the engines throttle response was much better.

Rather proud with myself, I decided to give a go at using some subaru upper engine cleaner to clean out the intake manifold where I couldnt reach.

All was going well as I sprayed the stuff through some intake lines. I then proceeded to spray it into a vac line on the manifold. All of a sudden the nozzle on the can disappeared into the manifold. Realising what happened I shut the car off straight away.

Naturally, I began tearing off intake piping in a frenzy. After removing all the piping and throttle body, I poked around with a small mirror and eventually found that 15cm long son-of-a-bitch in the intake runner 3rd from the back of the engine bay.

Phew - massive relief, it hasnt gone into the engine. It was lodged in the bend where the upper and lower manifold meet.

So I pulled out my flexible grabbing tool, carefully carefully trying to grab it, dont knock it, almost there, yep tha... FUUUUUUUUUUUUUUUUUUUU

Down it goes, further down the intake. Long story short after using tools ranging from a vacuum cleaner to swear words, converting to several religions to enlist the help of multiple deities, it was definitely stuck.

After I reassured myself with calm words of "youve f-ing f-ed it", I tried to unbolt the upper manifold, only to realise that the bolt locations on this was designed by the bride of satan. Seriously those bolts underneath? Whats with that? I gave up.

By now many hours had passed and my patience had worn. After much thought and deliberation I concluded that an Italian tune up was the best method. Soft plastic that was hot could not damage a valve.

So after 30 mins of flogging the car around I can only assume that it has met a fiery turbocharged high rpm demise. The engine is running perfectly.

Ironically the last time I used carb cleaner around the intake I taped it to the can precisely for this reason. Learn from your mistakes - or better yet learn from mine!

Link to comment
https://www.sau.com.au/forums/topic/338860-seafoamupper-engine-clean-warning/
Share on other sites

well it made me kinda lol but i dont quite understand how this happend "All of a sudden the nozzle on the can disappeared into the manifold" ?? u mean the whole part which u put ur finger onto or the even smaller part where the fluid comes from? never seen one of those come off :S

I'd say he's referring to the fine spray extension hoses that many aerosol cans come with. As he sprayed it down a vacuum line the vacuum sucked it down the manifold. Rather than pulling bits off I'd have just let it go too...a bit of plastic is no match for valves and fire :D

I wonder how hot it gets in the head where the intake valves are?

Im curious whether I have a small puddle of melted plastic in there. Would it be hot enough to burn? But if that were so wouldnt it be hot enough to ignite the air/fuel mixture? Or would the soft plastic eventually be fed into the cylinder?

Maybe ignorace is bliss.

Edited by zoomzoom

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...