Jump to content
SAU Community

Recommended Posts

  • Replies 52
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

someone find me some bc's in country and ill get it on its guts this week! :P

Shoot me a PM/email if you want to buy my RSR lowered springs. I had them in before I changed to the BC's. I changed because I wanted to drop it another few mm's but ended up raising it back up because I was hitting everything. I can send you a photo of how it sat with the springs in.

Chris.

Shoot me a PM/email if you want to buy my RSR lowered springs. I had them in before I changed to the BC's. I changed because I wanted to drop it another few mm's but ended up raising it back up because I was hitting everything. I can send you a photo of how it sat with the springs in.

Chris.

dude the springs would be awesome.. send us a pic asap! :P

Here is a picture.

stag.jpg

The ride height and spring rates were really impressive with these springs. We thought it had after market shock absorbers it rode so well, and were really surprised it was only springs when we pulled them out. Good value upgrade!

awesome stuff.

Thanks to spoolin i'll now have springs to suit my KYB dampers and new bushers waiting to go in on wednesday or thursday depending on when the springs arrive, then soon as thats done i can head to the tyre shop friday and get the nismos on properly!

Yeww should look and ride awesome :(

Cant wait.

P.S soon as this damn slim line fan arrives ill make plans for the HDI GT2 kit to go on..but i want to give it 2 days leway in case it requires some customisation and doesnt conflict with the suspension timeline..might have to wait till the weekend :)

Spoolins RSR springs arrived .. they look good :)

thanks spoolin .. awesome delivery speed :)

hopefully all go on tomorrow :)

worked out ive spent just shy of 7k just on rims , suspension and tyres ... lol (mind you it was 9400 retail price)

better be worth it :)

Edited by PetroDola
  • 2 years later...

Petro, sorry to drag up an old thread, would be good if you could post some of the final product stance pics on the end of this thread along with any additional details such as suspension and alignment settings. How was the tyre wear also?

  • 4 months later...

Shoot me a PM/email if you want to buy my RSR lowered springs. I had them in before I changed to the BC's. I changed because I wanted to drop it another few mm's but ended up raising it back up because I was hitting everything. I can send you a photo of how it sat with the springs in.

Chris.

Hi Chris,

Sorry to drag up old thread, but can you still remember details or any info in regards to RSR springs? would these springs suits an ARX? cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
    • Correct. Um. I dunno. I haven't cared enough about the way that the NA cars work to know for sure. But..... The 33/34 turbo manual cars have an electronic speed sensor in the gearbox that outputs a +/- (ie, sawtooth AC) voltage signal. That is connected to the speedo. The speedo then outputs a 0-5v square wave (ie, PWM) signal that the ECU (and any other CU on the bus) sees. The speed sensor is NOT directly connected to the ECU. So here's the problem. Your new ECU expects to see the PWM signal, but must somehow be getting a direct signal from the diff speed sensor. Which would suggest that the wiring of the NA car is not the same as the turbo cars. I think you will need to spend some time with (hopefully the wiring diagram for the car) and a multimeter to see what is connected to what. Then, presuming I am correct**, you would then want to separate the ECU speed signal input from the rest of the car's wiring, and probably either buy a speed signal converter, or build one using an arduino (or similar). That would take in the speed sensor signal and output a scaled (and suitably rearranged) signal for the ECU. ** We shouldn't presume that I am correct here, because there might be something else crazy going on. I don't think you could convert the speedo to be fed from the gearbox sensor, because the pulse rate from that sensor is probably different to the diff sensor and then the speedo would read wrongly. And this also wouldn't fix the ECU's problem either, because the ECU doesn't want to see the gearbox signal direct either (assuming that they are all on the same wiring, for some odd NA related reason, see above caveat!) Does this help? Probably not. Can you make it work? Almost certainly. With the above work. You should buy a handheld oscilloscope from Aliexpress so that you can view these signals directly. Connect up the probes and drive the car. Show photos of the screen when drving at known speeds and connected to different places, and we'll see what we can learn about it.
    • Assuming your brake pads are not worn right down, I'd add a little brake fluid. Is there any sign of a brake fluid leak?
    • Hello all,  I need of some help. On my drive home my handbrake light lit up and started flashing. When I got home I checked my handbrake sensor under the centre console and nothing seemed out of the ordinary. I have scanned my car via the consult port, no codes shown. Checked my brake fluid as well which is half full. Tried unplugging the brake master but it didn't change anything. Thoughts on what it could be? The master float doesn't seem to be stuck. My car is an 1998 ER34 sedan GT. No hicas but has ABS Photos below 👇🏾 
×
×
  • Create New...