Jump to content
SAU Community

Stillen Exhaust

GRK35L
 Share

Recommended Posts

GRK35L Rising Star

GRK35L

Posted
Posted

Hey , very keen on purchasing a stillen exhaust for my V35 Sedan and was just wondering whether there was anyone who has any reason why I shouldnt get it ???

Any feedback welcome

http://www.stillen.com/product.asp?id=STIS...model=G35%204DR

Link to comment
https://www.sau.com.au/forums/topic/339690-stillen-exhaust/
Share on other sites
pv35gt8 Collaborator

pv35gt8

Posted
Posted

I have one installed :D Very happy with the note, louder on start-up and more of a hint when warm(idle).

Good deep note when under power, and you can just hear it when cruising, you can tell that the noise is coming from the back not droning all the way down the car.

Link to comment
https://www.sau.com.au/forums/topic/339690-stillen-exhaust/#findComment-5486824
Share on other sites
  • 1 month later...
GRK35L Rising Star

GRK35L

Posted
  • Author
Posted

I don't think so , I know its hard not to get caught up in the noise of a new exhaust which can give the illusion of going faster but I honestly don't think the power has gone backward , having said that most people would recommend a tune after a new exhaust is put on , which will take me a while to get around to , am curious to see if had gotten a before and after dyno reading to see the difference

Link to comment
https://www.sau.com.au/forums/topic/339690-stillen-exhaust/#findComment-5552712
Share on other sites
iamhe77 Grand Master

iamhe77

Posted
Posted
Why have you experienced something like this??

Possibly, but it was hard to tell being that there was extra weight in the car at the time....

If I had to put money on it, I would say it made very little to no increase to power levels, but the feeling from the passenger seat was that torque may have decreased a little.

Still goes fine and it might just be a perception thing, but the owner also felt this way

Link to comment
https://www.sau.com.au/forums/topic/339690-stillen-exhaust/#findComment-5553418
Share on other sites
GRK35L Rising Star

GRK35L

Posted
  • Author
Posted
what did that cost you total in AU$ to have it paid for and deleivered?

It cost $1 400 to my door , took about literally an hour and a half to install (myself and couple of mates), and sounds amazing. So i'm happy with the buy.

Link to comment
https://www.sau.com.au/forums/topic/339690-stillen-exhaust/#findComment-5555896
Share on other sites
SyKRyD Contributor

SyKRyD

Posted
Posted
seems like an excessive amount of money to pay for a single system :/

you could get one made up for half the price

dunno about that. Having to custom make everything for my car, it's been nice just being able buy bolt on parts on the skyline - even if it's at a premium. Stillen seems to make decent qualty parts to boot so the price would be justified IMO.

Link to comment
https://www.sau.com.au/forums/topic/339690-stillen-exhaust/#findComment-5556966
Share on other sites
GeNOS Collaborator

GeNOS

Posted
Posted
dunno about that. Having to custom make everything for my car, it's been nice just being able buy bolt on parts on the skyline - even if it's at a premium. Stillen seems to make decent qualty parts to boot so the price would be justified IMO.

just cos its custom made dosnt make it any harder. i had a duel system made for my LS400 and it only cost me $750. fair enough it wasn't stainless, but a single system in stainless you could have made for a shit load less than $1400 drive in drive out(not that i see any reason to need it to be stainless other then wank and street cred).

Link to comment
https://www.sau.com.au/forums/topic/339690-stillen-exhaust/#findComment-5557038
Share on other sites
SyKRyD Contributor

SyKRyD

Posted
Posted
just cos its custom made dosnt make it any harder. i had a duel system made for my LS400 and it only cost me $750. fair enough it wasn't stainless, but a single system in stainless you could have made for a shit load less than $1400 drive in drive out(not that i see any reason to need it to be stainless other then wank and street cred).

Ok, I misread your post. I thought you meant make something up yourself, not get someone to make it.

Regardless, everyone has their own preference I guess. Not saying one is better than the other. Just saying it's nice to have someone else work out the problems sometimes and give you a bolt on solution. Even if it's at a premium. Not mentioned here is the potential resale value. Whether important or not, but the stillen may fetch more back % wise when it comes time to sell.

Anyways, just another perspective. Not looking to flame bait.

Link to comment
https://www.sau.com.au/forums/topic/339690-stillen-exhaust/#findComment-5557207
Share on other sites
scotty nm35 Grand Master

scotty nm35

Posted
Posted
just cos its custom made dosnt make it any harder. i had a duel system made for my LS400 and it only cost me $750. fair enough it wasn't stainless, but a single system in stainless you could have made for a shit load less than $1400 drive in drive out(not that i see any reason to need it to be stainless other then wank and street cred).

Mild steel is a third of the cost and yours would be press bent, a good lobster/mandrel stainless system would be tripple the cost in materials and twice the labour but worth it in the end as it would last forever. I cant even find a decent muffler for less than $300.

How is custom not harder? Its hand made, not cnc bent/robot welded. I need you to come and see the amount of work that goes into one of the 1000hp stainless systems I have made.

You took a stainless system off your LS and fit a mild one in its place? The stock one flows more than enough unless you went forced induction.

Link to comment
https://www.sau.com.au/forums/topic/339690-stillen-exhaust/#findComment-5557283
Share on other sites
PN-Mad Grand Master

PN-Mad

Posted
Posted
seems like an excessive amount of money to pay for a single system :thumbsup:

you could get one made up for half the price

Its not really a single system, if you look at the pic - its a dual system, with a X over, that runs to a single muffler at the rear.

Yeah, sure he could have got a bodged mild steel system bent up for less cash, but it wouldn't come close to a Stillen product.

BTW the price for that is 975 US, the rest is in airfreight... I'd love to see someone do a custom V35 sedan Dual Stainless exhaust with twin resonators for under 1000 AUD. I would sure be interested.

Link to comment
https://www.sau.com.au/forums/topic/339690-stillen-exhaust/#findComment-5557294
Share on other sites
GeNOS Collaborator

GeNOS

Posted
Posted (edited)
Mild steel is a third of the cost and yours would be press bent, a good lobster/mandrel stainless system would be tripple the cost in materials and twice the labour but worth it in the end as it would last forever. I cant even find a decent muffler for less than $300.

How is custom not harder? Its hand made, not cnc bent/robot welded. I need you to come and see the amount of work that goes into one of the 1000hp stainless systems I have made.

You took a stainless system off your LS and fit a mild one in its place? The stock one flows more than enough unless you went forced induction.

its not harder cos you drive to a shop and have it done.. im not saying to do it yourself.. and yes im talking mild steel, cos i dont get under my car and jerk off over a stainless system. they both do the exact same job

Edited by GeNOS
Link to comment
https://www.sau.com.au/forums/topic/339690-stillen-exhaust/#findComment-5560033
Share on other sites
GeNOS Collaborator

GeNOS

Posted
Posted
Its not really a single system, if you look at the pic - its a dual system, with a X over, that runs to a single muffler at the rear.

Yeah, sure he could have got a bodged mild steel system bent up for less cash, but it wouldn't come close to a Stillen product.

BTW the price for that is 975 US, the rest is in airfreight... I'd love to see someone do a custom V35 sedan Dual Stainless exhaust with twin resonators for under 1000 AUD. I would sure be interested.

ah ok didn't realise, i thought it was single from the front.

just cos its it mild steel, why do you assume its "bodged"? to assum that is very "fast and furious, full sic, gotta be stainless to be any good yo"

and how do you know it "wouldn't come close to a stillen product"? just cos its a brand name item dosnt mean its the bees knees.

regarding the freight, it was still paid there for its part of the total cost of the item.

Link to comment
https://www.sau.com.au/forums/topic/339690-stillen-exhaust/#findComment-5560038
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MissMintyR33
      R33 persistent issues. P/steering and lag/misfire

      By MissMintyR33 · Posted

      I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • GTSBoy
      Freddy Plenum vs Genuine options RB25

      By GTSBoy · Posted

      My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • Murray_Calavera
      R33 persistent issues. P/steering and lag/misfire

      By Murray_Calavera · Posted

      There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
×
×
  • Create New...