Jump to content
SAU Community

Recommended Posts

hi my r32 gtst 91 model up for sale as heading says it has 500hp at wheels on a street tune only 17psi on pump fuel it is a maatouk built rb30/26 everything has been done to this moter to support 1000hp and will do it with c16 fuel and is set up to do this.

just to try remember everything wat is done to this.

motor has only done about 3000km

forged pistons

forged rods

all new acl bearings

balanced crank

big cams cant remember wat size tho

large 10l sump

new bigger valves and springs

1000hp head gasket

hypertune plenum single throttle

1600cc injecters will suit c16

trust t88 turbo

50mm external gate

3.5 exhaust turbo back

microtech lt12s

splitfire coilpacks

massive radiator 70mm thick twin core

rb25 gearbox

custom tailshaft

r32 gtr diff and axles

jim berry full monty clutch

surge tank in boot with 2 o44 pumps running engine

o4o pump feeding surge tank

battery relocated to boot with cut off switch

twin fuel lines front to back all new

custom lines from rocker cover back to sump

thats all i can remember at the moment.

car is located in sydney and is also registered till july

it is a absolute weapon and has so much more that 500hp on 17psi is as low as we could get it to go due to wastegate spring set at 17psi

on e85 fuel will make 650hp with no worries

price is 30k neg

will get more fotos but dont have any since i finished the car

dont get on here to much so u can give me a call on 0431 314 714

post-45020-1286600257_thumb.jpg

Edited by brassil
Link to comment
https://www.sau.com.au/forums/topic/339749-r32-gtst-500hp-street-tune/
Share on other sites

  • 2 weeks later...
hi my r32 gtst 91 model up for sale as heading says it has 500hp at wheels on a street tune only 17psi on pump fuel it is a maatouk built rb30/26 everything has been done to this moter to support 1000hp and will do it with c16 fuel and is set up to do this.

just to try remember everything wat is done to this.

motor has only done about 3000km

forged pistons

forged rods

all new acl bearings

balanced crank

big cams cant remember wat size tho

large 10l sump

new bigger valves and springs

1000hp head gasket

hypertune plenum single throttle

1600cc injecters will suit c16

trust t88 turbo

50mm external gate

3.5 exhaust turbo back

microtech lt12s

splitfire coilpacks

massive radiator 70mm thick twin core

rb25 gearbox

custom tailshaft

r32 gtr diff and axles

jim berry full monty clutch

surge tank in boot with 2 o44 pumps running engine

o4o pump feeding surge tank

battery relocated to boot with cut off switch

twin fuel lines front to back all new

custom lines from rocker cover back to sump

thats all i can remember at the moment.

car is located in sydney and is also registered till july

it is a absolute weapon and has so much more that 500hp on 17psi is as low as we could get it to go due to wastegate spring set at 17psi

on e85 fuel will make 650hp with no worries

price is 30k neg

will get more fotos but dont have any since i finished the car

dont get on here to much so u can give me a call on 0431 314 714

post-45020-1287475712_thumb.jpg

post-45020-1287475736_thumb.jpg

post-45020-1287475759_thumb.jpg

post-45020-1287475782_thumb.jpg

post-45020-1287475806_thumb.jpg

post-45020-1287475826_thumb.jpg

post-45020-1287475848_thumb.jpg

post-45020-1287475876_thumb.jpg

post-45020-1287475911_thumb.jpg

post-45020-1287475953_thumb.jpg

post-45020-1287475975_thumb.jpg

post-45020-1287476012_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...