Jump to content
SAU Community

Recommended Posts

  • Replies 165
  • Created
  • Last Reply

Top Posters In This Topic

These people have sent me entries with nothing in the licence section:

Ash Cosgriff

Please print off the form from the link below, fill it out 100% and ... bring it to sign in with exact money

That is what I am doing. I have a form here and will bring with exact money on the day.

Most of the other guys in the list are FA's, and will be doing the same.

Crap, gosh, etc, sure is filling quickly, payed just now will fax entry in the morning.

woo hoo, FWD come on down, 109kw atfw with new ECU, long wang look out here I come. :)

These people have sent me entries with nothing in the licence section:

Daniel Robson

Steven Skrekovski

Tony Skrekovski

Jack Kuzior

Ash Cosgriff

David Lee

Edwina Andrews

David Church

Srete Cvetkoski

Glynn Matthews

Please print off the form from the link below, fill it out 100% and either send it to AASA bring it to sign in with exact money please.

Anybody who does not have a licence can do this.

Ok just clearing a few things up. I'm not actually the one racing. It is my car but on the form I put down "Megan Vansteensel" as the driver. The reason my licence number is not on there is because it's expired and I wont be there to renew it. Megan will be the one driving the car and she will be purchasing her membership and licence on the day. Is that all cool? :)

WTF is with this 'cheater car' bullshit, im reading it everywhere lately.

Aint jealousy a bitch.

yeah sucks, FWD may be an enormous advantage but wtf fwd is ftw imo. jk

Crap, gosh, etc, sure is filling quickly, payed just now will fax entry in the morning.

woo hoo, FWD come on down, 109kw atfw with new ECU, long wang look out here I come. :)

Yay! Clive representing the FWD's again :(

Ok just clearing a few things up. I'm not actually the one racing. It is my car but on the form I put down "Megan Vansteensel" as the driver. The reason my licence number is not on there is because it's expired and I wont be there to renew it. Megan will be the one driving the car and she will be purchasing her membership and licence on the day. Is that all cool? :)

Not a problem, i did not see that. Ill change the name over.

Deca is well and truely sold out at this stage. list will be updated shortly.

Will fax forms tomoz morning for reserves list (however long the list will be). Was 50/50 about this round so I'll let the fate of other vehicles falling to pieces decide it muhaha.

Guest
This topic is now closed to further replies.



  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...