Jump to content
SAU Community

Recommended Posts

Hi Guys,

so i just bought a skyline v35 from trader who advised me that i can use the

Shell Unleaded E10 fuel type.

does anybody here recommend this? the fuel cap says 'premium unleaded only'

and the shell website says 'shell Unleaded E10 has a minimum 94 octane rating'

is this ok? i don't know much about this stuff but hopefully you guys can help!

cheers!

Link to comment
https://www.sau.com.au/forums/topic/339952-shell-unleaded-e10/
Share on other sites

No I would certainly not use it. I would only use 98 octane fuels.

On the shell website it also says:

If your vehicle manufacturer recommends a minimum 95 octane then Shell V-Power may be a more suitable fuel.

If they dont recommend it for cars that recommend 95 octane, I certainly wouldnt use it on cars that recommend 98 octane fuel.

Also, my experience using the old 100 octane shell fuel which also contained 10% ethanol was it got considerably worse fuel economy until you had it tuned for it.

No I would certainly not use it. I would only use 98 octane fuels.

On the shell website it also says:

If your vehicle manufacturer recommends a minimum 95 octane then Shell V-Power may be a more suitable fuel.

If they dont recommend it for cars that recommend 95 octane, I certainly wouldnt use it on cars that recommend 98 octane fuel.

Also, my experience using the old 100 octane shell fuel which also contained 10% ethanol was it got considerably worse fuel economy until you had it tuned for it.

well i'm currently using 95 octane cos its premium unleaded? i guess i'll keep to it..

E10 has up to 10% ethanol in it.

Unless your fuel system is designed to cope with it, dont use it. It chews away at rubber and plastic within the fuel systems.

As above.. not a good idea.

so just to clarify 95 octane is (at a minimum) the right fuel for me? lol i think i'm willingly confusing myself..

E10 has up to 10% ethanol in it.

Unless your fuel system is designed to cope with it, dont use it. It chews away at rubber and plastic within the fuel systems.

As above.. not a good idea.

Hmm I thought all those myths had been put to rest. How many people are running E85 (85% ethanol) on this and other forums without issues with factory fuel lines etc??

so just to clarify 95 octane is (at a minimum) the right fuel for me? lol i think i'm willingly confusing myself..

No I think 98 octane is at minimum the right fuel for you. I would never use any less. Japan has 100 octane fuel.

E10 has up to 10% ethanol in it.

Unless your fuel system is designed to cope with it, dont use it. It chews away at rubber and plastic within the fuel systems.

As above.. not a good idea.

Thats a myth. I've run 20% Toluene, many other additives. Not a single problem.

As for the OP, Id find a service station with BP98, Shell 98, or Caltex 98. They may cost you a few dollars more, but I bet you go more kms too.

Thats a myth. I've run 20% Toluene, many other additives. Not a single problem.

As for the OP, Id find a service station with BP98, Shell 98, or Caltex 98. They may cost you a few dollars more, but I bet you go more kms too.

For how long?

I know personally of race cars who have left ethanol fuels in their rubber fuel bladders and fuel lines for a couple of weeks between events and have chewed through standard fiel lines.

This is just my personal experience.. other people may have different experiences.

Edited by GTS4WD
Thats a myth. I've run 20% Toluene, many other additives. Not a single problem.

As for the OP, Id find a service station with BP98, Shell 98, or Caltex 98. They may cost you a few dollars more, but I bet you go more kms too.

well are there any adverse effects from pumping 95 octane fuel? cos i've been using that for a while now...and is it ok to mix 95 and 98..?

For how long?

I know personally of race cars who have left ethanol fuels in their rubber fuel bladders and fuel lines for a couple of weeks between events and have chewed through standard fiel lines.

This is just my personal experience.. other people may have different experiences.

dude, it's a myth. my car ran on E85 for about 18months straight, also didn't get driven for weeks at a time as well. Car still in perfect health.

if you're talking say a 1985 car or something like that, perhaps, but really any of our cars will be fine.

I noticed this and I asked the local Shell about it. They told me their E10 is only rated at 94 octane minimum. United E10 which I normally run in the daily is the same price (if not slightly cheaper) and is minimum 95 octane.

I noticed this and I asked the local Shell about it. They told me their E10 is only rated at 94 octane minimum. United E10 which I normally run in the daily is the same price (if not slightly cheaper) and is minimum 95 octane.

How do you find the E10, do you get worse fuel consumption? or is it tuned for it?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Do a degree in mechanical engineering specializing in combustion systems and materials. Learn how to actually wrench on things that don't require 70k+ USD buy-in while you're at it. You also want to learn to weld and machine. If you still want to do this then you'll nominally have the knowledge to actually do what you're thinking of doing. Whether you still want to do any of that once you've actually gone through that process is anybody's guess. Personally I cannot imagine anything more frustrating than trying to package a supercharger under the hood of any of these cars when the turbos are already fighting for every last inch.
    • That's a function of the fuel pressure reg, not the pump. The pump can do more, needs to be able to do more. The reg keeps the pressure in the rail constant above whatever the manifold pressure is.
    • You need enough post count to have PMs enabled. It will come. They are not the same. The NA box is the skinny little box and the turbo box is the big heavy one, and the yokes are not interchangeable.
    • So, you're not talking about rebuilding the dampers, just putting new tops on them? You just need new tops and a spanner.
    • Hi All, Does anyone know how or who (shop) could rebuild my original R32 GTR Nismo struts? These are the OG logo ones that were a factory option back in the day. I've replaced them with aftermarket coilovers which are good, but the OG Nizmo struts tha i bought the car with i feel are amazing, just the rubber tops are worn and would need replacing... Plus it would make it 100 time easier for me to get the GTR fully engineered without adjustable coilovers... I was considering selling the OG suspension, but if i can get them rebuild / refurbished, I would seariously put them back on. Cheers, Tom   p.s. I'm in Sydney by the way and don't mind travelling if need be to get these puppies rebuilt.
×
×
  • Create New...