Jump to content
SAU Community

Recommended Posts

  • Replies 206
  • Created
  • Last Reply

Top Posters In This Topic

  • 4 weeks later...

Haven't got it back yet. I've been garenteed to have it this friday, which i will make sure happens cause i've hired baskerville for the whole day this saturday. I'm just about sick of waiting though, was supposed to be done 2 months ago. Will post up results along with a detailed list of what been done to it as soon as i get the chance to.

  • 2 weeks later...

Alrighty, Got her back yesterday. dont have the dyno sheets on me but i remember most the figures i think.

Firstly i'd like to mention cause she's got a stock slush box in it, i'm refering to the auto, we couldn't push it to much and we were getting consistant 175rwkw and we could of got a few more pounds of boost on but the gearbox won't handle any more power. So for the time being we've dropped it back to 165rwkw until i get around to putting a r33 manual box it. Mechanic has told me with a conversion and a retune we would get over 200 atw.\

I think i had about 75~78 rwkw before and about 200nm torque, she now has around 165rwkw and somewhere over 400nm torque.

like i mentioned above, its a stupid auto. will get around to that when i have money. dont have any pictures or the dyno sheets on me but i will get them to ya's as soon as i run out of money for fuel.

oh and the boost is coming on around 3000rpm when ya flick through the gears your self and a little later when in drive.

it is a little laggy for my liking but its also a good thing cause i can drive her around lightly when i dont want to attract attention.

will get more to ya's soon.

sounds good and well done for doing it differently. you might find it cheaper to tuffen up the std auto vs changin to manual? just a thought

also if its auto youll have auto diff gears, you can get some more response changing to 4.11 diff gears (manual)

the gear box is on its way out, i have a spare one but i have no idea on it's condition, when i booked it in we were going to put an lsd in it but i forgot to ask if that got done. guess i'll have to go do a road test and work that out. what costs are involved in making the auto tougher? im assuming the lsd would have manual diff gears but as i have no knowledge on that topic i am just assuming.

running about .8bar, which is about 12psi i think. engine has only just been rebuilt and i'm running it in as per my mechanics instructions.

will hopefully get some stuff up for ya's later on today, wont be able to get any decent pictures up for a bit cause i can't get under the car. tis very low.

any one who wants to have a look at it just drop me a pm, im in Tas (Hobart) so all my two headed cousin's can have a peek.

cheers

  • 2 weeks later...

Finally got off my arse, here's the dyno sheets. Second one is just an enlarged pic of the before/after dyno.

Keep in mind she's got a tourque convertor and we had to tune it down due the the slush box being a shit box.

post-77498-0-29626100-1294019421_thumb.jpg

post-77498-0-48258800-1294019448_thumb.jpg

Now lets hope that works and you can all see.

Putting it up on the hoist tomorro so i'll try get some pics of the set up for ya's.

Sorry for making you all wait.

yeah i'm pretty happy with it.

Just sourced a manual lsd cheap so that should improve takeoff response i assume. Seeing as i have an auto diff.

And i've just been reading that a r33 auto box will fit into a 31. I'm seriously considering that if i can get it on the cheap seeing as i won't be able to afford a r33 manual conversion for sometime.

If anyone wants more info let me know and i should be able to get ya the answers, don't really feel like doing a full write just now. too lazy!

Have a search through the for sale section, there was an r33 auto in there with shift kit for $200 i think, they were also selling a higher stall converter seperate from memory, should be exactly what you need.

cheers, reading more i discovered that the box will fit really easily except the speedo wiring and plugs are different, however, the 31 speedo fits the 33 speedo housing which is good cause then my speedo reads correctly?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I have been being VERY quiet about what you're alluding to, as it is something that ticks me off... The number of cars from factory that run coil overs is HUGE! Most of them these days do... The other part that annoys me, is people saying "Well all the incabin adjustable suspension is illegal by blah blah blah"... If that's the case, then why can I buy a car brand new that can do it if, FULL STOP in cabin adjustable suspension is illegal...   Also, I could just chuck some aftermarket shocks in my car, throw the stock springs on, after my blue slip, dump my super low springs back in. Same shock and spring style setup... Hell, they could also be the same colour springs etc.     I'm voting, BlueSlipper didn't want to touch the above car for some reason. Whether it be some sort of bias against the car, the owner, them maybe having previously done dodgy shit and now they're being super careful in case they get slapped in the face by the Gumbyment again... Find a new blueslip place.   And can confirm as you had said, yes there are holy bibles of vehicle heights, and all sorts of other suspension stuff. Heck your run of the mill mechanic, and tyre shop has access to all of that stuff. It's how they do wheel alignments...
    • Funny story Heading to Sydney this morning on the HWY there was some slow traffic, so I gave it the beans and midway through my overtaking "power run" I lost all power It seems that I missed a hose clamp,  and the MAF and filter went WiFi To make this more problematic, the little tool kit that lives in the boot, is sitting in the sun room at Goulburn......LOL Luckily for me I found a bit of steel on the side of the road that could be used like a rusty and bent flat head screw driver to tighten it up enough that it got me into Sydney, it is now all tight like a tiger with the aid of a 8mm socket Note to self: Use my brain and double check stuff, and always keep that little tool kit in the car for when I have a brain fart
    • Oh, and as for everyone with their fuel economy changes, I switch between E10 and 98 in the company car. Even do when I had personal cars that could run on E10. You know what changed my fuel economy in any noticeable way? How I drove, and where I drove. Otherwise, say on full tanks of just back and forth from work only (So same trips, same sort of traffic), couldn't notice a difference that I can correlate to the type of fuel in use. In the current vehicle, that's over 42L of USABLE fuel. While 98 is all "more energy dense", it also has higher knock resistance as it takes more energy to get it to ignite too. The longer hydrocarbons, typically more tightly bound. So running the same ignition map, can also produce less power, if there isn't enough time to get it all burnt through properly, as yep, the flame propagation speed is different from lower octane fuel to higher (Higher has a lower flame propagation, due to the more tightly bound and harder to self ignite funs. This is also typically where, a vehicle that is designed purely to run on 91 (Whether it be E10 or normal 91) usually sees absolutely no real world difference in fuel economy for the normal man, woman, or dog.
    • We've got some servos around me that have 91 with E10, 91 (no E10), 95, and 98. At those stations the change from 91 E10 to 91, is typically around 8c/L.   But lets not get started on the price of fuel in Oz. It's ridiculous. All the service stations around me, bar one, the price of fuel has been over the $2 mark per litre for the cheapest, 98 being around $2.45. That one service station is a CostCo, fuel from it comes from the same refineries, and makes no pitstops, it runs great, including the 98. In fact, I've had no issues on CostCo fuel, but plenty of issues at other stations!. The CostCo fuel, was $1.65 roughly this week for 94 with E10. $1.88 for 98. Servos directly across from it, $2.10 for 91 E10, and $2.48 for 98. The part I had to laugh at? If I drive multiple HOURS away from Brisbane, say out near Nanango, or Kingaroy, or even out to Goondiwindi, the price of their fuel, is the same as what it is at the CostCo... Oh, and that BP servo at Goondiwindi is HUGE and goes through epic turnover of fuel, so it's not sitting there for weeks going to shit. And what blows me away, my mate is one of the people who drives the Fuel Tanker all around QLD, delivering to all those places. At the same company his previous role was doing the "local haul" deliveries... Same truck, same driver, same pickup point it all comes from. So you tell me, how the hell it is 60c/L CHEAPER for fuel, when nearly all else is equal, except they require a B-Double to drive half a day out of Brisbane, and half a day back, every second day, compared to the delivery that can be under 30 minutes drive from the fuel pickup point... Not to mention, go five blocks down the road, and Ampol to Ampol will vary 30c/L... And I've had this conversation with my mate... The way it's priced, is just typical, pure and utter rubbish... He also does runs from Brisbane, to all over QLD, down to Newcastle, Sydney, Nowra, Melbourne, Geelong, and even out to parts of the NT depending on the companies needs. His main stuff is all the longer distance away from home for a few days at a time, then when he's back, he loves to just pickup extra shifts wherever he can in whichever truck, hence all the weird different places.   Oh, as for getting E10 into all the fuels in Australia... It was very quickly highlighted, that we don't have enough biomass available to use to make E10 sustainably like they require, and it would dramatically cut into our, and the worlds food chain supply...   I vote we all just start running on liquid methane gas... Plenty of that just getting tapped off at tips from underground decay... (Note, this is pure just stupid commenting. I could very easily highlight the reasons its not a good idea especially on scale...)
    • Am I correct in assuming that the R35's are getting the classic skyline haircut off the odometer?  Quick search on carsales, there are 33 08 and 09 GTR's for sale, only 2 of them have more then 100,000km's on them (116,075 and 110,000 respectively).  And somehow there are about 25 for sale with around 60,000kms? Looks like the classic skyline haircut to me =/
×
×
  • Create New...