Jump to content
SAU Community

Recommended Posts

  • 3 years later...

Apologies for thread dredge... but my Stagea needs lower control arm bushes done.

Doing a bit of reading here and elsewhere it seems SuperPro are the aftermarket option and it appears SuperCheap Nz does supply that brand.

Couple questions, is it a fairly straightforward job to DIY, haven't mucked about with car suspension bits before. And anyone else done same, part number etc???

2005 PM35 350RX

Haven't done much more than poke my head behind wheel for quick look so far... Other than that shes been running well.

I ordered my Stagea control arm bushes from SuperPro in Brisbane online, they were a great help!

I did also find some on ebay here... http://www.ebay.com.au/itm/SUPERPRO-FOR-NISSAN-STAGEA-M35-AWD-RWD-Control-Arm-Lower-Inner-Bush-Kit-/141973305710?hash=item210e44b96e:g:4QoAAOSwaZdXID5Y

You can also order direct from Nissan Online and have them shipped straight to you here... http://www.nissanparts.com.au/stagea_nissan/nissan_stagea.html they are great too! Often they have the parts locally they can send to you pretty quick.

I'm not sure about making them yourself, but I did have a mechanic offer to make them for me when I could not find them so it must be able to be done.

Cheers Stagea Brother!

Cheers. Yeah my mechanic said Nolathene agent in Auckland custom make stuff if you give them sizes. What ive read so far seems like superpro is the go and I'll just have to remove/cut out the old one and get a workshop to press in the new ones.

BTW I previously posted here as Shopping Trolley in past but buggereed up me email/logins trying to recover password.

  • Like 1
  • 5 months later...

Old thread, I know, didn't want to make another one considering it's been mentioned in here but I can't find a link to one. Does anyone have a diagram of all the suspension part numbers and bushes? I am going to be replacing basically all the rubber underneath and was hoping for a diag to help me in my search. Also does anyone know the P/Ns for diff mounts, etc?

 

Thanks.

Sorry I cannot find it, it was the guys at VON Bibra Holden on the Gold Coast that sent it to me, maybe drop them a  line, they are really good with Stagea parts, also maybe ask at http://www.nissanparts.com.au/stagea_nissan/nissan_stagea.html  when you complete this form you end up being contacted by VON Bibra Holden.

Hope this helps.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...