Jump to content
SAU Community

Recommended Posts

So i'm looking into buying some lenso D1R's, and not completely sure what colour to get, as well as offsets, etc. My r34 gtt is black with an impul kit (see pictures below) , and will be getting smoked indicators all round fairly soon unless you think clear might suit this set up better? I got my brother to do a really quick photoshop job on a picture of the car to give some sort of idea as to what they will look like in both black w/ red line, and aluminium w/ polished lip. Personally i'm heading towards the aluminium look with smoked indicators, but that's where i'd appreciate some constructive comments (none of the usual "oh they're bad rims anyway" "they're heavy" etc etc.) They will be street wheels, not for the track, so therefore i dont mind if they have a bit of weight or arent built to the same quality as some proper jap wheels. The size and offsets of rims, as well as tyre sizes i'm looking into running are 18x9 +12 225/40/18 (front), 18x10 +22 255/35/18 (rear). Would these be the best size to fit? I looked in the R34 Picture thread and "SiNNO" is running this setup, so i know it can be done, but my car is sitting a bit lower than his, so i might need a bit of camber? Is this the most aggressive setup I should run? These photoshopped pics give no justice to the amount of dish there would be, especially at the rears. :) Couldnt get pics to sit in here from photobucket, so have to upload them the crap way :) .

post-76525-1287144742_thumb.jpg

post-76525-1287144822_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/340645-new-rims-on-34-gtt/
Share on other sites

not a fan of the wheels at all but if i had to choose id say go the black and f**k off the red line....

I see where you're coming from, but i'm only looking into getting them because they are a cheap wheel with good dish. Not looking to spend a large amount of money at the moment to get some volk/work/gram lights.

So i'm looking into buying some lenso D1R's, and not completely sure what colour to get, as well as offsets, etc. My r34 gtt is black with an impul kit (see pictures below) , and will be getting smoked indicators all round fairly soon unless you think clear might suit this set up better? I got my brother to do a really quick photoshop job on a picture of the car to give some sort of idea as to what they will look like in both black w/ red line, and aluminium w/ polished lip. Personally i'm heading towards the aluminium look with smoked indicators, but that's where i'd appreciate some constructive comments (none of the usual "oh they're bad rims anyway" "they're heavy" etc etc.) They will be street wheels, not for the track, so therefore i dont mind if they have a bit of weight or arent built to the same quality as some proper jap wheels. The size and offsets of rims, as well as tyre sizes i'm looking into running are 18x9 +12 225/40/18 (front), 18x10 +22 255/35/18 (rear). Would these be the best size to fit? I looked in the R34 Picture thread and "SiNNO" is running this setup, so i know it can be done, but my car is sitting a bit lower than his, so i might need a bit of camber? Is this the most aggressive setup I should run? These photoshopped pics give no justice to the amount of dish there would be, especially at the rears. :) Couldnt get pics to sit in here from photobucket, so have to upload them the crap way :P .

hey mate,

definately would go for the black hweels and the smoked Nismo indicators and front lamps.

They'll look tuff! The black D1Rs won 'Best Wheels Award' at last year's R34 GT-R 10th Anniversary.

That doesn't say much for the people voting or the wheels that were there. I hope it's just clueless people voting for Chinese wheels over multi-thousand dollar lightweight race wheels.

Contact Jesse direct on [email protected]

You won't find service like him anywhere else and the prices will kill anything locally.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Before all the EFR fan boys come in, have a look at: https://www.garrettmotion.com/racing-and-performance/performance-catalog/turbo/g-series-ii-g30-825-58mm/ It also comes in a T4 1.06 divided housing. I would dare say if you want response & also decent power, this thing would chop.   AND apologies, just re-read your post, you've already bought the turbo... whatever you do, make sure you stick with divided housing and proper twin scroll manifold.
    • People have got to stop doing that. ShatGPT is not a search engine. It is a hallucination factory.   I also would recommend the 1.05. The .83 will "work" for you , in that it will be more responsive, but I think you'll find that it won't be anywhere near as good running it out to 8000rpm as the big housing will be.
    • Decided for the first time ever I would tow my car TO the track day on the same working theory as bringing tools and spares "if I have it I wont need it, but if I leave it behind i will 100% need it" all setup and ready to go out and try these A050 for the first time First session showed I needed to stiffen up the dampers a touch but still managed a few 1:21's without much effort. things were looking good. Came in a dropped the tyres down  to 26/28 as they had gotten to 35/33C from 22C cold The first lap of session two I managed to drop into 1:20's. Then in the second lap into the second session. Coming into T3 and I suddenly lost brake pedal followed by some huge rear end vibrations and scraping sounds. Got it back into the pits after session ended and found this. in the attached video, all of the wobble is in the hub its self, wheel is mint, and bearing feels tight. lKXLqpd - Imgur.mp4   Deciding it was a bent spindle I tried to find bearing/hub assembly locally but was unsuccessful so it was loaded back onto the trailer i luckily brought it on to drag it back home  
    • 1.05 you’ve gotta let it breath 
    • You have to continuously fill it to avoid dry running. Personally the transmissions I've serviced have never been bad enough to justify doing this because it is definitely a pretty complicated and somewhat risky procedure compared to simply draining the pan, measuring what came out, then refilling with the exact same amount.
×
×
  • Create New...