Jump to content
SAU Community

Recommended Posts

Do you mean you pulled out coil from cyl 1 and put a old plug in it, and earthed the plug somewhere on the car and cranked it, and the coil is firing the spark plug okay?

If thats the case, then maybe its your injectors? check all your injectors are getting power to each plug. If its got spark and its not firing, then it probably doesnt have fuel. Maybe your injectors are completely buggered, or maybe they are dirty.

Did it just "happen" one day, or have you done something to your car and now its not working?

means its sparking but not firering the spark plugs are fine
All it tells you is that #1 coil is working.

Have you checked the spark plugs in 1,3,5 cylinders? Have you checked that the injectors are working - maybe they need a good clean?

Do you mean you pulled out coil from cyl 1 and put a old plug in it, and earthed the plug somewhere on the car and cranked it, and the coil is firing the spark plug okay?

If thats the case, then maybe its your injectors? check all your injectors are getting power to each plug. If its got spark and its not firing, then it probably doesnt have fuel. Maybe your injectors are completely buggered, or maybe they are dirty.

Did it just "happen" one day, or have you done something to your car and now its not working?

what happened was i spun out round a corner when i started it again it was running on 3 cyclinders and wouldbt boost was blowing heaps of white smoke it all so burnt my boost line from my waste gate to the turbo where u put ur boost controller so it was ventin to the air thought it was a blowen head gaskit but since then have conpressen tested the motor seems to be fine hasnt used any coolant at all and the oil is fine looks brand new still

yeah i pulled out the coil pack from cyclinder 1 put a old plug in it to see if it was sparking its sparking fine so its not a sparking issue im yet to get a led test light to check the injector pulse. all so have swapped my inighter pack over and swaped my ecu with another car that was working fine did nothing different so cant be that

Doesnt mean they arent fouled.

You can check everything else on the car but with out pulling the plugs there isnt much point.

But If you dont think its your plugs, Id start checking the Diff and the handbrake cable, cause that will fix the problem.

Doesnt mean they arent fouled.

You can check everything else on the car but with out pulling the plugs there isnt much point.

But If you dont think its your plugs, Id start checking the Diff and the handbrake cable, cause that will fix the problem.

swaped plugs over with one of the cyclinders that are running made now difference plugs are fine happy now

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
    • Probably. I take it that they are also mentioned to be for R34 Skyline? For example.... RDA has that part as RDA7957. I have the dimpled and slotted version of that on my car https://www.ebay.com.au/itm/285518478694?srsltid=AfmBOopKxMuAFpsxZJdB1cam4D5RAj1f9yJyOttPZLAwXVNCOiwlhrIy This is DBA's top one piece equivalent https://www.ebay.com.au/itm/364246686631?srsltid=AfmBOorbb0XHQgqTvZLgQPhg70nqJtGvdojKnugum3O2LFSr2h-obp8D  
    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
×
×
  • Create New...