Jump to content
SAU Community

Recommended Posts

Hey guys i reconected the heating system on my R33 GTST because for some reason the owner b4 me had bypasseed it by linking the to hosses from the firewall together. Since ive reconected it i get this real stail smell of like old coolent kinda like thge smell of a radiator.. Ive fixed problems like this on my previous car by buying a special detergent that you spray with a nozzle down the centre air vent. i tried to do this but i noticed that the centre vent comes on an angle and makes it impossible to get the nozzle down and spray.. i just wanted to know if u guys have had this problem and have found a fix?? Thanks =D

Link to comment
https://www.sau.com.au/forums/topic/341019-bad-smell-in-the-heating-system/
Share on other sites

its definetely not leaking coolant from the heater core and thats why it was bypassed? coolant dripping out the air con drain? i know the spray your talking about but i thought its meant to be put through the inlet and filter?

there is a DIY about getting the heater out without pulling the dash from memory. might be able to have a look in there and see whats causing it or lay some plastic through the car and give it a quick hose out if its bad

its definetely not leaking coolant from the heater core and thats why it was bypassed? coolant dripping out the air con drain? i know the spray your talking about but i thought its meant to be put through the inlet and filter?

there is a DIY about getting the heater out without pulling the dash from memory. might be able to have a look in there and see whats causing it or lay some plastic through the car and give it a quick hose out if its bad

nah heater core is definently not leaking the smell only comes on as soon as you turn the switch on ive checked around and i have no leake inside or outside the cabin.. as for the spray Inlet & Filter ive never heard of that kind. the one i use works by feeding a long plactic tube down the center vents which lead to the heater core id guess u spray for 10 secs then turn the aircon on for 10mins and u can see allthe green gungy crap come out from the aircon dripper thing underneath. then u get in car and smells fresh lol

nah heater core is definently not leaking the smell only comes on as soon as you turn the switch on ive checked around and i have no leake inside or outside the cabin.. as for the spray Inlet & Filter ive never heard of that kind. the one i use works by feeding a long plactic tube down the center vents which lead to the heater core id guess u spray for 10 secs then turn the aircon on for 10mins and u can see allthe green gungy crap come out from the aircon dripper thing underneath. then u get in car and smells fresh lol

If you're not leaking any coolant into the car, which I'm in the middle of fixing myself with a new heater core, then the smell could be coming through your air system. My heater box stunk of coolant. If it's happening when you turn the key, is your climate control set to blow air? What happens if you turn the climate control completely off, does it still smell?

If you're not leaking any coolant into the car, which I'm in the middle of fixing myself with a new heater core, then the smell could be coming through your air system. My heater box stunk of coolant. If it's happening when you turn the key, is your climate control set to blow air? What happens if you turn the climate control completely off, does it still smell?

ok when climate control is of i get a faint smell now and then but when its on boom the smell smaks ya in the face also i need to fix that damn vent motor clicks everytime i start the engine i know there is a DIY on here.... Can the heater box be opened and cleaned??

ok when climate control is of i get a faint smell now and then but when its on boom the smell smaks ya in the face also i need to fix that damn vent motor clicks everytime i start the engine i know there is a DIY on here.... Can the heater box be opened and cleaned??

My heater box had the smell and there was the watery coolant substance on the bottom. All it needs is a good clean, and the smell should vanish in time. But to get the heater box out, you'll need to take your car apart pretty much until it looks like this:

post-a310136-IMG-1772-tn.jpg

I didn't take my heater box apart. Rather there were large openings where my hand could fit in. And I cleaned off all kinds of marks, scunge and other crap in there. But taking the heater box apart completely doesn't look to hard I don't think.

As far as the source of the smell, it's not just going to be the heater box however. The coolant came from somewhere, so it's still possible you've got a leak. The smell would disappear even if you didn't clean the heater box if there wasn't a leak. So a continual smell means you need to find the source.

My heater box had the smell and there was the watery coolant substance on the bottom. All it needs is a good clean, and the smell should vanish in time. But to get the heater box out, you'll need to take your car apart pretty much until it looks like this:

post-a310136-IMG-1772-tn.jpg

I didn't take my heater box apart. Rather there were large openings where my hand could fit in. And I cleaned off all kinds of marks, scunge and other crap in there. But taking the heater box apart completely doesn't look to hard I don't think.

As far as the source of the smell, it's not just going to be the heater box however. The coolant came from somewhere, so it's still possible you've got a leak. The smell would disappear even if you didn't clean the heater box if there wasn't a leak. So a continual smell means you need to find the source.

could the smell come from in the radiator because it doesnt look like it has had coolent in a while i bout this car recently. if i flush the radiator would that help to clear the smell and no guys i assure u i dont have any leaks from anywaher ive looked at all the hosses there isnt even any signs of a leak

could the smell come from in the radiator because it doesnt look like it has had coolent in a while i bout this car recently. if i flush the radiator would that help to clear the smell and no guys i assure u i dont have any leaks from anywaher ive looked at all the hosses there isnt even any signs of a leak

I don't see how it could come from the radiator. If the radiator and cooling system is sealed, you're not going to be able to smell anything. Flushing might help, but even old rusty colored coolant won't produce a smell if the system is free of leaks. Since you are smelling something, then the smell is originating from some form of coolant. Thus where is this coolant, and why is it there, is what you need to find out.

I wasn't aware I'd lost an entire engine block full of coolant until my heat gauge shot up. The carpets, and underlay are so thick, you wouldn't even know there's a leak. So I'd pull up the passenger side carpet and check under it.

Getting back to the smell, the smells seems to be coming from the heater box. The only thing in that heater box that has anything to do with coolant, is the heater core. Since hot coolant is fed into the core from the engine, despite you not being able to find any leaks, the signs point to there being a leak somewhere. If the smell smells like coolant, then it can only get there via a leaking heater core, or a cracked pipe connected to the heater core.

Edited by KrazyKong
I don't see how it could come from the radiator. If the radiator and cooling system is sealed, you're not going to be able to smell anything. Flushing might help, but even old rusty colored coolant won't produce a smell if the system is free of leaks. Since you are smelling something, then the smell is originating from some form of coolant. Thus where is this coolant, and why is it there, is what you need to find out.

I wasn't aware I'd lost an entire engine block full of coolant until my heat gauge shot up. The carpets, and underlay are so thick, you wouldn't even know there's a leak. So I'd pull up the passenger side carpet and check under it.

Getting back to the smell, the smells seems to be coming from the heater box. The only thing in that heater box that has anything to do with coolant, is the heater core. Since hot coolant is fed into the core from the engine, despite you not being able to find any leaks, the signs point to there being a leak somewhere. If the smell smells like coolant, then it can only get there via a leaking heater core, or a cracked pipe connected to the heater core.

ok well next week im off work for 1 week ill rip out the interior and see whats going on thanx for the help guys i appreciate it. hope its not the heater core i hear they are hard to find these days ahh well i could always bypass it again like the last owner

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
    • Punch your VIN (nm35-xxxxxx) into Amayama.com You can see everything there quite easily.
    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
×
×
  • Create New...