Jump to content
SAU Community

Recommended Posts

I swore I saw this car yesterday waiting at the Beach, Wannroo lights didn't know it was stolen at the time or I would have followed them.

They where heading towards the Wannroo, Jundalup way Hope this helps

thanks

Chris

yerh szetos old car. so they are NOR by the looks off it. good stuff mate.

I swore I saw this car yesterday waiting at the Beach, Wannroo lights didn't know it was stolen at the time or I would have followed them.

They where heading towards the Wannroo, Jundalup way Hope this helps

thanks

Chris

Did you see how the people looked like in the car??..

Obviously he has reported it to police as stolen right?

Make sure he fills in a stat dec re lost/stolen number plates and sends the form to the dept of transport. He can get the form from www.transport.wa.gov.au/licensing and go to the forms and publications section.

"update" car has red vinyl's added on the side of the car, mate of mine spotted it driving but it was to late to follow him because he was in traffic, was going jundalup way? so im thinking he lives around there....

haha yeh, would hate to be the guy if we find him... tied up to a light pole upside down when the cops find him lmao

ps i toned that down cause i wanted to be good :ermm:

Edited by Neuroglider

i live north mate and i drive through and around the whole of joondalup nearly everyday for parts and errands etc, ill deffs keep a look out and if i spot him/her i will stop at nothing to make sure i track em down to where their staying

Can't believe if this has been stolen that they are still driving it around!! They have probably swapped the plates too, so it has to come down to the look of the car or hoping the police run the plates and/or pull the car over....

And as for saying this was an inside job from the people at the gym...don't be stupid!! Guaranteed this was a crime of opportunity

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...