Jump to content
SAU Community

Recommended Posts

  • Replies 48
  • Created
  • Last Reply

Top Posters In This Topic

Am i right in reading that its a L2S license, rollcage/harnesses type event or have i read the regulations wrong? I didnt see a price either.

The attached entry form should be completed in full and forwarded to the Event Secretary with the entry fee of $170.00

The Competitor and both crew members shall be required to hold a current CAMS Clubman Rally Licence or L2S or superior

I don't believe you require either rollcage or harnesses, just if they are installed then they will need to meet CAMS Regs.

Am i right in reading that its a L2S license, rollcage/harnesses type event or have i read the regulations wrong? I didnt see a price either.

My reading is that it is a Stage 1 event, which does not require a rollcage or harnesses, but if you have them, then they have to comply with Schedule J. The point that I was less clear on was whether just the driver needs a L2S licence, or whether the navigator does as well - which would seem daft, as the driver must drive 100% of the time. If the "co-driver" is to drive, they must do a separate entry.

I think.

I am sure "Speedaware" would be happy to answer queries.

I would love to do this, but neither the GTR or the Pulsar would be ready for next week or even December. I am not sure I could prepare either car adequately for January/February either. So maybe next year. Definitely keen on trying this kind of event, though.

Cheers. ;)

Edited by MLCrisis
Is Will driving, or are you sharing the drive ?

Yeah it'll be Will, bugger we'll be in the same class, doesn't look like it matters if you run semis or not..

oh well I'll have to try and make up some time on the straights.

as for the course, if you've ever done any of the little motorkana courses down there, apparently its all them joined up, including that little goat track between the strip and the roads over the back :P

I'll let you know after thursday..

as for the course, if you've ever done any of the little motorkana courses down there, apparently its all them joined up, including that little goat track between the strip and the roads over the back :D

I'll let you know after thursday..

Yeah, I thought the course would be something like that. Should be pretty good fun :P

Lets chuck in extra 35-40 kilos in your car :)

Mate I'm not on no diet, and remember its a GTR so no light weight :) but yeah no point carrying more than you have to, I'll be taking the spare out :D but thats about it..

did you get your turbo sorted after Shannons, that hurts, to have to pull out first thing, after shelling out $600 for the day?? :P

night went well, pretty fast course, over 200kms in a couple of spots ( they were the only times I look down ) hard to see some of the corners in the dark, and a bit slippery on street tyres, but a shit load of fun, a few incidents more left on trailers than came on them and a lot came on them,

thought I was doing alright until I found out the sticky tyred, caged up Evos were 10 seconds quicker than my 2mins 35sec,

I'll post up some videos when I have a chance the edit it tonight maybe..

Yes was a good night , top 4 spots were Evo's . Good to see Bruce listened to our advice n dialled up the big launches , 1 nasty GTR :blush:

Franz 1st

Ross

Simon

Will

Awsome event and keen to run in the next 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...