Jump to content
SAU Community

Recommended Posts

  • Replies 109
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

i'm pretty sure i came dead last haha.. the next day my neck was KILLING me!!!!

the one tip i found was tense up your entire core, focus on your abs and obliques while driving - that stablises your head and helps to push through the jolts of the simulator!

bernard - the espresso in my coffee was great.. nice and strong.. hence why i needed a bit more milk!

constructive criticism though - milk doesn't need to be that hot :P obviously magazines say get it to about 63c but anything over about 57 and it becomes unstable and seperates...

it was also a bit bubbly - early on in the steam, suck a bit of air into it and get bubbles happening but once you've got air in the milk (you did this) - bury the nozzle into it and tilt the jug to spin the milk and heat it... (you did this too)

but once it starts to actually warm.. - slooowwwwwwllyyyy lift the nozzle to JUST under the surface, literally JUST beneath it.. the nozzle should make this VERY quiet hissing sound and those big frothy foamy bubbles will disappear and you'll start to get lots and lots of tiny tiny ones which will create one uniform consistency of thick creamy milk that will look like paint.. once it looks like paint you've done it right ;)

oh and if you've got it right then you should never need to "bang" the jug or anything.. and obviously keep rolling the jug so that the milk stays the one consistency..

:)

you're a great coffee maker i'm not trying to step on your toes here i just like sharing ideas.. that system of milk steaming is what i find works best for me! :)

the one tip i found was tense up your entire core, focus on your abs and obliques while driving - that stablises your head and helps to push through the jolts of the simulator!

^^^come to think of it maybe i should have focussed on driving my god damned car and not coming last. haha

Hi Fella's,

Glad to hear you all enjoyed it. I'll try to upload some photos over the weekend. We had a great time and really enjoyed crankin the Angels up on the jukebox with the Crash N Burn cars in action.

We are looking at having a New Years Party with a Dukes of Hazzard theme and having some Daisy Dukes serving the food. We'll dress up Baily as Boss Hogg. I'll keep you posted if it goes ahead. We'll work on a limited amount of tickets on a first in first served basis - with a "No Dickheads Allowed" policy. We're just waiting on the go ahead from Westfield.

All the best and thank you for your business,

Tom Kennedy

SimWorld Entertainment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...