Jump to content
SAU Community

Recommended Posts

So what ill need to do would be to change the Gtst resistor pack to the GTR one? or is dont gtst have a resistor pack as such?

thanks Roy much apreciatted!

Get your hands on an RB20DET wiring diagram, you will find that the wiring diagram for the R32 RB20DET and RB26DETT are on the same diagram (well they are on mine) which helps spot the differences.

The RB20DET does not have a resistor pack, the GTR does. Essentially you need to cut into the power wire that feeds all the injetors, off the firewall it runs on top of the fuel rail branching off where there are injectors. So before it branches off to feed a voltage to any injectors you need to cut it and solder it to the 7th wire on the resistor pack. Then from the resistor pack you have 6 wires that then run to the +ve spade on the injectors. So essentailly you are wiring the resistor pack in series before the injectors, just as std on a GTR.

I should have taken photos... :Oops:

  • Replies 121
  • Created
  • Last Reply

Top Posters In This Topic

Hi jnr32r, Power FC requires the standard impedance injectors, which on an R32 GTST RB20DET are 12-14 ohms (generally called high impedance). R32 GTR RB26DETT have low impedance injectors, around 3-5 ohms. If you use low impedance injectors then the PFC will get too much current drain and overheat.

Hope that helps

I am using 13B non turbo injectors which are either 420cc or 460cc Lol damn memory! Anyway I got them from a fella from nissansilvia.com for $35 each. They fit straight in, the last 4 digits are 1350 from memory??? Anyway I also, during the conversion got new injector plugs, which are similar to the stock ones except the lug is in the centre and not offset. They also have the spring you push down to unplug them vs the spring clip that gets flicked off and lost. I am running a microtech LTX12 (a 180sx RB20DET) and haven't got the car back yet so I cannot comment on the further.

do you happen to have pics of the mod'd clip to fit the 13b injectors? Thanks

Im not using a Power Fc but am using the GTR injectors & resistor pack on RB20 ECU.

So std RB20 ECU requires high impedence injectors to limit the current to the ecu...so can use:

- high impedence injectors and standard ECU OR

- low impedence with resistor pack, and std ECU. As impedence of (low impedence injector + resistor pack) equated to using high impedence injectors, the ECU doesnt know any better.

Hi jnr32r, Power FC requires the standard impedance injectors, which on an R32 GTST RB20DET are 12-14 ohms (generally called high impedance).  R32 GTR RB26DETT have low impedance injectors, around 3-5 ohms.  If you use low impedance injectors then the PFC will get too much current drain and overheat.

Hope that helps

Will that still happen even if you have a resistor pack, from RB26?

well, injectors are on way :D

Once I have got hold of the management side of things, they will be going in and then I guess we'll see how they work

Chris

  • 6 months later...
Hi jnr32r, Power FC requires the standard impedance injectors, which on an R32 GTST RB20DET are 12-14 ohms (generally called high impedance).  R32 GTR RB26DETT have low impedance injectors, around 3-5 ohms.  If you use low impedance injectors then the PFC will get too much current drain and overheat.

Hope that helps

I hope this is'nt true because I have a PFC and GTR injectors/resisters are going in this weekend

Thanks Champ. Don't kill yourself getting the work finished this weekend. I'm currently looking around for some injectors so i can be safe running higher boost => more power on the straights at PI and Sandown :P

I have'nt put them in yet coz I was finding out if they would work with the PFC.After reading SK post it put me off trying it coz I did'nt want to do damage to the ECU.

Roy you'll be the first to know how it goes after I finish that beer.

Chris32 I'll take pics as I go.Hopefully this weekend I'll do it all.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...