Jump to content
SAU Community

Recommended Posts

Ok its time to part out my drift project that almost made it but has to makr room for a house. I am open to REASONABLE offers on all things.

- Pintara gxe shell with REG till March 2011, series 3 fromt end, series 3 tail lights, sound deading removed, BRAND NEW battery mounted in boot and wired up, slight damage to left hand sill

price $200

149423_458959350877_536325877_5698260_3291826_n.jpg

73001_458962475877_536325877_5698277_485159_n.jpg

- 4x114.3, 25mm x 2 bolt on spacers

Price $125

- Monza Evo fixed back race seat on r31 rail

$110

148693_458975370877_536325877_5698351_566004_n.jpg

- Brand new HSD HR s13 coil overs, modded to fit straight in to diff (still have to drill rear shock tower) 10kg front and 8gk rear spring rate

Price $1400 (cost me $1600 a couple of months ago)

n536325877_1938727_7361233.jpg

- S13 front controll arms with uprights and brakes (pads and disks)

Price $180

- barnd new Microtech Lt10s with x4 ignition box and 4 x coils

Price 1200 (microtech cost me $1300 and coils cost me $200)

148338_458975710877_536325877_5698360_6592498_n.jpg

- Ca18de package , has turbo manifold (T3 flange), oil return pipe in sump, Ca18det injectors, BRAND NEW exedy clutch, Recoed Altinator, ca18DET gear box, cutom gear box mount, urethane engine mount, Brand New NGK Iridium plugs,

Price $850 (Clutch cost me $750, alt cost $120 to reco, urethane mounts cost $80, you do the math)

4519_85395005877_536325877_1938737_5702046_n.jpg

75777_458964700877_536325877_5698291_297899_n.jpg

- S13 turbo box with Ca18det bell housing

Price $180

- 11 x stock steel rims with 185/75 r14 tyres,8 are road worthy.

Price $100 (thats less than $10 a wheel and tyre)

- 2 x 235/45 r17 bridgestone potenza tyres a little camber ware but above indicators

price $65

77026_458964095877_536325877_5698283_5155830_n.jpg

- 2 x 235/45 r17 mixed tyres just above indicators

price $35

- 2 x Rays tag rurher rims 17" x 9" with 80% tyres

price $350

72742_458974765877_536325877_5698343_1414994_n.jpg

- 4 x enki rims 17"x8" and 17"x7" with 235 and 215 tyres about 60% tread left

Price $750

76383_458976670877_536325877_5698388_3861180_n.jpg

-New bosch 044 external pump (has only been installed)

Price $150

4519_85395065877_536325877_1938748_7617424_n.jpg

-New in tank VL lift pump (has only been installed)

Price $100

- 1lt stainless steel surge tank

Price $180

- s13 ca18 brake master

Price $50

- s13 ca18 brake booster

Price $30

- s13 ca18 power steering pump

Price $30

- Random front strut brace

Price $30

73728_458977520877_536325877_5698403_1207940_n.jpg

- S14 standard exhaust dump pipe back

Price $30

74413_458964465877_536325877_5698288_3614993_n.jpg

- s14 standard side mount intercooler

Price $40

73733_458964490877_536325877_5698289_434581_n.jpg

- 2x 17x8 rims, rubber is only good for skids, 5 x 120.4 commmodore/bmw stud pattern

74166_458963995877_536325877_5698282_5954509_n.jpg

Link to comment
https://www.sau.com.au/forums/topic/343963-parting-out-my-drift-car-melbourne/
Share on other sites

hey nath I am in Ferntree Gully, melbourne. coil pack and loom is for sale with the microtech and the inlet manifold is for sale with the engine. the cooler and turbo setup is not for sale as I am keeping it.

There is a pic up of the intercooler, that's all...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
    • Yeah - I mean, go the other way. Smaller range. Not larger.
×
×
  • Create New...