Jump to content
SAU Community

Recommended Posts

so recently i woke up to go to work and found i had a flat battery, i checked with my alternator and after i jumped it it was charging around 13.4, there was this strange sound under my bonnet, i thought it was a bearing, but turns out its the alternator might be diodes or the brushes, they quoted me from 200-350 to fix it i thought i may as well buy a new one, so i checked around and No one not even Bosch makes them, they make them for R31's R32's some R34's but not the one i have,

the battery i had in it was a 300 made for a R32 lol... not even the right one, i was suposed to have a 450-500.

any one else get annoyed by things like this

is the alternator dieing a big thing with the 33's

Link to comment
https://www.sau.com.au/forums/topic/344240-alternators-for-rb25/
Share on other sites

so recently i woke up to go to work and found i had a flat battery, i checked with my alternator and after i jumped it it was charging around 13.4, there was this strange sound under my bonnet, i thought it was a bearing, but turns out its the alternator might be diodes or the brushes, they quoted me from 200-350 to fix it i thought i may as well buy a new one, so i checked around and No one not even Bosch makes them, they make them for R31's R32's some R34's but not the one i have,

the battery i had in it was a 300 made for a R32 lol... not even the right one, i was suposed to have a 450-500.

any one else get annoyed by things like this

is the alternator dieing a big thing with the 33's

sounds like its charging if its 13.4 which i guess was at idle. you sure the noise is from the alternator? 450-500 cca batteries are a bit overkill. something you would expect on a falcon or commodore that doesnt have reduction drive starter and couple more litres to push over. need to check alternator voltage with lights on etc to see if it dies in the ass. maybe something was left on like interior light... there would be another alternator you could use most likely but plugs would need to be changed. get new bearings and brushes fitted as the other parts either dont move or wear out. the sound prob wont be brushes but sometimes when a diode dies and not running on a phase can cause funny sounds.

if brushes are worn it is pretty easy to tell.

if they are completely gone, your battery voltage won't be up at 13.4, because there is no power coming in from the alternator.

if they are slightly worn, the voltage should dance around a bit and not really be stable.

I recently had the alternator in my 33 die, was a case of one of the diodes packing it in so the system always had like a 3A current draw.

so maybe check that? make sure your battery has some charge then disconnect one of the terminals and put an multimeter (set to 10A or something to be safe) in series and see if there is any current draw while the car is off.

i did hear an odd whine kind of noise when mine was playing up, but it wasn't very loud.

They aren't too hard to replace either, you could even get away with not taking off all the other drive belts if you just loosen that one and let it hang (or do what i did and use it as an excuse to replace them all because they were old >.< )

haha yeah so turns out, i was at my girlfriends parents place when it died, her dad is an auto elecie so he had a look at it for me,

we pulled it off and it was the diodes because when it was running with the belt on but the charger wire off it made no sound, so i took it off and called every place i knew, no one made them, i had to work monday so my girlfriends mother took it to an auto electrical place that specializes in alternators, they said they could have gotten the diodes from a chinese company that makes replacements but they did not trust em, they had an alternator off of a mazda they used lol.

purrs like a kitty now :D so happy was not to expensive either,

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
×
×
  • Create New...