Jump to content
SAU Community

Recommended Posts

Same here, Nismo lift, 2x044s, surge tank, twin entry rail, ID2000s, lines front to back etc etc.

My mates GTR made high 500awkw before they put a 3rd one in. Now makes 720awkw :P

Well thats a little comforting!

  • Replies 113
  • Created
  • Last Reply

Top Posters In This Topic

You should be able to fit 3 in (I've got 3 in mine), how is it currently setup?

Nismo lift into surge and both 044's mounted on the surge. I was discussing with Steve today that IF it comes to it we might have to make a bracket and mount one next to the surge. Thing is how do we merge the 3rd pump into the 2 lines? Hmm?

^^^ with any luck I will have the results on Friday arvo. The good thing about this is there will be two maps done.... 98 and E85. Same dyno, same tuner, same setup 1 day apart.

I did a 98 map and one for avgas mix same dyno about 25mins apart. dont remember injector dc tho.

Went from 420rwkw @ 19psi to 475rwkw @ 24psi. And then we picked up on the oil problem that resulted in a bent crank...

RB30 crank. Nothing special. The workshop that fitted the engine here in Tassie hooked the oil cooler lines backwards so oil was pumped to the wrong side of the filter relocation kit and things were a little starved of oil.

Thats what I said. When its marked "in" and "out".

Its a shame as the engine was going to make some good power. The engine was built and shipped here so only needed to be fitted. I was going to fit it myself but didnt have the time. I wish I made time now. lol

Its been sent back to the builder for a new crank and whatever else is needed to get it up and running again.

Next tune will be on E85. Thats why im interested to see what everyone else is doing.

If I need a 3rd 044 then so be it. :)

Ok so Paul and I were talking about this in depth tonight.

We are both concerned about max flow for big power but the empty surge tank thing is a huge concern aswel so we will test that first

We are going to take the pump off and test the flow properly, we will post up accurate results (will be on e85) as it seems no one else has this info.

There is another option from 3 or even 4 044's. I use 2 x Pierburg pumps on my GTR. out of 1 dash 6 line (my return from my reg) at 40psi I get 12.5 liters a min. The also are a sucker and a pusher so no need to have them fed by other pumps. Has seen around 610rwhp with no dramas at all. They are ethanol/methanol friendly as well.

I actually have no surge tank, but have 2 x Dash 10 lines feed into my tank with strainers connected directly to the fuel line.

Obviously if I have descent G's and under a 1/4 of a tank I will have issues but until then I can hold it flat for ages and not have a drama.

Always handy if you are towing a trailer, up a hill in the sand :)

Ok so Paul and I were talking about this in depth tonight.

We are both concerned about max flow for big power but the empty surge tank thing is a huge concern aswel so we will test that firstWe are going to take the pump off and test the flow properly, we will post up accurate results (will be on e85) as it seems no one else has this info.

does anyone run a low level switch in their surge? if there was a spot inch or so above pickup connected to a simple warning light might give piece of mind down the strip?

does anyone run a low level switch in their surge? if there was a spot inch or so above pickup connected to a simple warning light might give piece of mind down the strip?

i think on circuit it would be a good idea , but just for strip i reckon u have some massive problems if u can empty ur surge in 11 secs or less

Here is a new issue. Over filling over the surge tank. Now having 2 044's feeding the engine not all the fuel is going to be used. The fuel heats up and expands..... Has anyone split a tank due to excessive pressure?

There is a thread on the pommie forum about this. The line back to my main tank from the surge is the same as the incoming return..... Maybe I should have made it a few sizes bigger!!! BAH!

Here is a new issue. Over filling over the surge tank. Now having 2 044's feeding the engine not all the fuel is going to be used. The fuel heats up and expands..... Has anyone split a tank due to excessive pressure?

There is a thread on the pommie forum about this. The line back to my main tank from the surge is the same as the incoming return..... Maybe I should have made it a few sizes bigger!!! BAH!

and/or put a cooler in the return line

i have a small tranny cooler from super shit in my return line, works well. before that the pump used to start cavitating on hot days after half an hour or so of light driving, now it takes a really really hot day for it to do it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...