Jump to content
SAU Community

Recommended Posts

Kudos in the F/S section does good exedy clutches, not the dodgy generic ones. A HD organic would be plenty for you if you've got a stocker and they have been known to hold quite a bit more. They still grab well but are very nice to drive around compared to a button clutch and 1000% better than an extreme.

Kudos

I'm not sure if the ones in the link are the Sports Tuff ones but sent the guy an email or give him a call and he will sort you out.

Edited by Race__24

my extreme hd is still holding up very well. chucked it nearly 2 years ago, its lasted a bunch of track days, hill climbs, hills runs, dailying, and generally f**king about.

... i do however have an ats sitting outside that ill rebuild... eventually.

my old extreme clutch looked like that end of last year lol. people who went on the riverland show last might remember that my clutch started slipping something serious on the cruise and the car was only making 215rwkw. got it home and had it changed to find out that my clutch was absolutely gone. bought a el-cheapo thrash around one of habibay. its a F1 racing clutch and for $390 del with everything i was happy and it is still going making 241rwkw and done a 3 full on track days. So for me a F1 racing clutch of habibay was awesome as it did the job and is still going fine ;)

i can vouch for the clutches madaz gets we put one behind one of our cars 270 kw and it copped a flogging for the 2 yrs we had the car after that as far as i know that clutch is still in that car .

cheers dean

Edited by mid life crisis

correct a true testament to a clutch builder :)

all silliness aside though i don't ride my clutches its on or off (not a button mind you its cushioned)

the worst thing for ceramic clutches is starting stopping slow riding traffic

I've just killed my ceramic extreme clutch.

bought it with kevlar buttons and noticed that it was worn down when i did my engine rebuild.

so i rebuilt the clutch at the same time with ceramic pads, but now after 1.5years it is stuffed. it hasnt started slipping yet, but the pedal after one track day is only biting literally mm's before i take my foot off the pedal completely, and at the start of the day it was biting in the middle of the pedal swing.

I've got it booked in for it to be removed and I'm sending it off to Jim Berry to get him to turn it into one of his "Full Monty" clutches.

It was alright when running 300rwkw but at 350rwkw it started to cause me a little bit of grief.

Hopefully Jim can put together a clutch that will last me.

the current one is an extreme HD 6 button clutch with the stronger pressure plate and chrome flywheel.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
×
×
  • Create New...