Jump to content
SAU Community

Recommended Posts

Hi all,

I stacked my GTR other day so I have number of parts that are surplus to my needs.

Pictures will be taken later or PM/SMS me your number and I'd be happy to take some photos from my mobile for you.

I have the following parts for sale.

1; Pair of Nismo AFM, in good condition, used for about 3,000km from the fellow I bought off. Part number is 22680 RR580 A36-00 J71.

Asking $600.

2; Pair of Noltec Castor rod, in brand new condition.

Asking $300.

3; A set of Racing Gear JTC N1 coilovers to suit BCNR33/BNR34/ER34 fork type, unsure about spring rates, no leaks or knocks as far I can see. Just put your standard tops on them.

Asking $400.

4; Standard airbox for BCNR33 (was told it'll fit BNR34) with snorkel but no filter, no nuts and bolts though.

Asking $200.

5; A set of HKS Hiper D to suit ECR33/ER34 eyelet type. Rear left have slight knock, no leaks though.

Asking $300.

6; A set of HKS Hiper D to suit BCNR33/BNR34/ER34 fork type, front pair doesn't have springs, rear pair doesn't have leak, Condition looks to be in ok condition.

Asking $150.

7; Pair of HKS adjustable actuators to suit GTR based turbos (34 N1/-7s, GT-SS/-9s, -5s and similar) item in good condition.

Asking $300.

8; Standard R33 GTR front pipe, may fit R32 GTR.

Asking $50.

9; 2x Compliance spec cataylic converter, both of them have cells inside 2.5" diameter.

Asking $10 each.

10; A set of standard suspension tops for R33/R34, all in good condition.

Asking $100.

11; Box of part needed to convert from push to pull type, came off my R33 GTR when I installed OS Giken Triple plate with pull to push. suit R33 GTR and R32 GTR as well.

Asking $50.

I think thats it for me at the moment, if I find some more I'll add to this thread.

Items are located at Doncaster East, VIC, 3109. Happy to post small items, larger and heavy items, I'd prefer for them to be pick up.

I can be contacted via PM on this forum or shoot me a SMS on 0430 129 511 (That'd be lovely if you DON'T call me).

Cheers

Grant

R-spec, sms me your email, I'll take some pics, you need fork type for 34 gt-t but I have another, i'm happy to swap fork from eyelet for you.

Nismo AFM is sold pending money clearance.

Cheers

Grant

After quick look around and I've found couple of parts that I won't need.

1; Space saver spare tyre - FREE, pickup only.

2; Pair of front lower ball joint (steering) to suit BCNR33, may fit other models. Part number is 40160-05U00.

Asking $200.

3; Garage Saurus remap ecu to suit BCNR33 RB26.

Asking $100.

Cheers

Grant

1; Pair of Nismo AFM, in good condition, used for about 3,000km from the fellow I bought off. Part number is 22680 RR580 A36-00 J71.

3; A set of Racing Gear JTC N1 coilovers to suit BCNR33/BNR34/ER34 fork type, unsure about spring rates, no leaks or knocks as far I can see. Just put your standard tops on them.

5; A set of HKS Hiper D Coilovers.

These parts are SOLD

Other bits listed are still available.

Cheers

Grant

Just to let you all know, parts in post #1 and #6 is only what I have so don't bother asking if I'll have what you're chasing.

Cheers

Grant

Hi all,

Update.

6; A set of HKS Hiper D to suit BCNR33/BNR34/ER34 fork type, front pair doesn't have springs, rear pair doesn't have leak, Condition looks to be in ok condition.

Asking $150.

Is sold pending payment.

2; Pair of Noltec Castor rod, in brand new condition.

Asking $300.

7; Pair of HKS adjustable actuators to suit GTR based turbos (34 N1/-7s, GT-SS/-9s, -5s and similar) item in good condition.

Asking $300.

8; Standard R33 GTR front pipe, may fit R32 GTR.

Asking $50.

9; 2x Compliance spec cataylic converter, both of them have cells inside 2.5" diameter.

Asking $10 each.

10; A set of standard suspension tops for R33/R34, all in good condition.

Asking $100.

11; Box of part needed to convert from push to pull type, came off my R33 GTR when I installed OS Giken Triple plate with pull to push. suit R33 GTR and R32 GTR as well.

Asking $50.

Are still available.

1; Space saver spare tyre - FREE, pickup only.

2; Pair of front lower ball joint (steering) to suit BCNR33, may fit other models. Part number is 40160-05U00.

Asking $200.

3; Garage Saurus remap ecu to suit BCNR33 RB26.

Asking $100.

Also are still available.

Offers welcome for parts that are available.

Cheers

Grant

Hi all,

Time for thread bumping and do feel free to make an offer on available parts!

Cheers

Grant

Yep wrote it off at DECA and have since sold the wreck so no parts from the wreck at all, these were what I've sitting in the garage.

Cheers

Grant

Yep wrote it off at DECA and have since sold the wreck so no parts from the wreck at all, these were what I've sitting in the garage.

Cheers

Grant

Hi all,

Space Saver spare tyre are GONE!

Offers welcome on the available parts so, feel free to make an offer on them.

Cheers

Grant

Hi folks,

Price drop on all available items.

2; Pair of Noltec Castor rod, in brand new condition.

Asking $250.

6; A set of HKS Hiper D to suit R33 GTST/R34 GT eyelet type, front pair doesn't have springs, rear pair doesn't have leak, Condition looks to be in ok condition.

Asking $100.

7; Pair of HKS adjustable actuators to suit GTR based turbos (34 N1/-7s, GT-SS/-9s, -5s and similar) item in good condition.

Asking $250.

8; Standard R33 GTR front pipe, may fit R32 GTR.

Asking $25.

9; 2x Compliance spec cataylic converter, both of them have cells inside 2.5" diameter.

FREE

10; A set of standard suspension tops for R33/R34, all in good condition.

Asking $80.

11; Box of part needed to convert from push to pull type, came off my R33 GTR when I installed OS Giken Triple plate with pull to push. suit R33 GTR and R32 GTR as well.

Asking $25.

2; Pair of front lower ball joint (steering) to suit BCNR33, may fit other models. Part number is 40160-05U00. These cost $316 brand new from Nissan.

Asking $150.

3; Garage Saurus remap ecu to suit BCNR33 RB26.

Asking $80.

Cheers

Grant

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...