Jump to content
SAU Community

Rb26 Engine Builder

bigbig

By bigbig,
in New South Wales

 Share

Recommended Posts

Beer Baron Grand Master

Beer Baron

Posted
Posted

hi brad, there are tons of workshop recommendation threads in both the nsw section and forced induction section. pls do some reading in both.

also bear in mind everyone has their own agenda when recommending places and everyone has their own unique experiences. on top of that nearly every workshop will have some positive and some negative stories so my advice is call a couple and see what you personally think about them.

bigbig Collaborator

bigbig

Posted
  • Author
Posted
hi brad, there are tons of workshop recommendation threads in both the nsw section and forced induction section. pls do some reading in both.

also bear in mind everyone has their own agenda when recommending places and everyone has their own unique experiences. on top of that nearly every workshop will have some positive and some negative stories so my advice is call a couple and see what you personally think about them.

Thank you

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • soviet_merlin
      Howdy Y'all

      By soviet_merlin · Posted

      Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      What Duncan said sounds right. Also, it looks like they only have the driver's mat. Not the rest. Because looking at the diagram: KG4911 is just the mat for the driver. KG4900 is the full set if I'm not mistaken and discontinued.   But, it looks like they may still have the full set for the manual S2. Might be worth checking for the other models as well as they seem slightly different. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/misc/G49 Man, I'm tempted.
    • GTSBoy
      WGNC34 - floor mats

      By GTSBoy · Posted

      I dunno about that as a blanket statement. Pitwork is Nissan's "Nissan genuine" thing, and for stuff like timing belts, I have found them to be excellent. Of course, for things like oil filters, you always use proper trusted brands anyway, not whatever the OEM has taken to using.
    • MBS206
      R34 Skyline climate control unit transistor

      By MBS206 · Posted

      Ahhhh... If you were putting 12V to the led in there, that's likely made it very unhappy. Chances are how you put power, was 12V across an LED that's meant to only have about 20mA through it at peak, and a forward voltage of about 1.8 to 2.4 volts. That circuit is likely only a 3V3 circuit, and will have a resistor in series with the led too. That's my guesstimate on that light, without having touched one.
×
×
  • Create New...