Jump to content
SAU Community

Recommended Posts

Well just had a very disappointing phone conversation with a certain 2nd hand parts Japanese-IMPORTS business, that has absolutely no interest in supporting the products he sells. His words; "As soon as you pay for it and take them home, it's your problem".

A while back, i bought a set of rims, but before being able to fit them to the car, i had an engine fault that required a rebuild. After the car's maiden cruise to Mt Bulla, i had a flat tyre, so i took it to get repaired. Unfortunately there was no fault with the tyre, but a crack in the rim caused the air to escape. There is also no external damage to the rim (apart from the crack).

To be honest i didn't expect this guy to happily replace the wheels, at no cost, but to come to some sort off arrangement where i'd be well looked after (ie: he does not make a profit on the replacement rims).

It just amazes me how people with such a lack of people skills still remain in business. I guess the % off shit that farks up and thus the % of clients he burns, does not out weigh all the other sales that happen to run smoothly.

If you need to know who this guy is shoot me a PM

I am now off to see a wheel repair place, so they could assess whether the rim is repairable.

If the rim is not repairable i will be giving Aaron at Import Monster a call, to replace these rims. Should have used Aaron in the first place!!!

Rant over :banana:

Link to comment
https://www.sau.com.au/forums/topic/346020-buyer-beware/
Share on other sites

  • Replies 48
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

If the rim is not repairable i will be giving Aaron at Import Monster a call, to replace these rims. Should have used Aaron in the first place!!!

Rant over :banana:

Im really sorry to hear that Al.

Aaron is the greatest man I know for pretty much anything Import Related. New or second hand, it doesnt matter. If he has the contacts you will get it....and at a great price.

Not long ago he hunted down for me a NEW OEM fuel tank for my EMO 6 from Japan......and at half the cost Mitsubishi Aust wanted. The dude is AWESOME

/mancrush

Link to comment
https://www.sau.com.au/forums/topic/346020-buyer-beware/#findComment-5573003
Share on other sites

I know what you mean.. when i took my car for a check on a engine fault he told me the problem, left the car with him and when i came back the next day told me it was something else and he still needed $250 even though there was no work done to the car...

Some people... sad world.

Link to comment
https://www.sau.com.au/forums/topic/346020-buyer-beware/#findComment-5573018
Share on other sites

Rang up Neway Wheels and was advised that they no longer repair cracks in alloy rims as it may re-crack and cause an accident. I had also been advised by my metal fabricator (when i asked him to weld my spacers to the rims) that welding alloy softens the material.

So looks like i'll be giving Aaron a call. Hopefully he could track down a pair of ragamasters 18x8.5-35, otherwise i'll just buy a new set and use the rears for DECA :banana:

Link to comment
https://www.sau.com.au/forums/topic/346020-buyer-beware/#findComment-5573041
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Im not entirely sure exactly what or where its leaking from, he started to pull the boots to swap to my new tie rods + ends and it just vomited fluid, so he closed em up up, swapped the rod ends to the old rods and let me know so I can figure a solution out, im guessing its all origional as as I passed 103k miles earlier this year im sure its just in need of a full overhual/rebuild anyways.    If i could just yank it off and be good it wouldn't be an issue to ship it out and wait for the turnaround but the guy I work with doesnt really have space to keep my car for a week or two at a time, would rather drop it off and have a replacement ready to drop in
    • What do you mean by "seals"? Internal hydraulic seals (ie, is it leaking PS fluid?) or the rack boots that close the rack onto the tie-rods? Because the former is a rebuild, and the latter is trivial that you or any nearby mechanic could do. Dunno about the cowl. Just buy what you think is required and get anything else you find/break afterwards. Wing? Dunno. Don't like R33s enough to pay attention to them. Mirror glass is just glass (on the surface that you want to polish). Go for it.
    • Hello! Long time lurker, been using the forums to address concerns and questions from afar for a while but I've struggled to find some answers so I guess its about time I made an account and formally asked some more knowledgeable people, since finding local skyline owners is hard (and shops that are knowledgeable or trustworthy to work on 'rare' cars are non existent out where im at, as skylines are quite uncommon to find in the wild around here). So the main 3 questions I have, 1: Steering rack has blown seals, well.. they kind of hold but they are not sealed properly anymore and as my R33 is my DD, i cant exactly rip the rack out and send it off or attempt to fix myself. As most refurb ones are around $1,100 or more shipped, and I have other things I need to work on around the car, I was seeking clarification on whether an S15 rack will more or less bolt right in, and whether a common mechanic could do any other required work to get it to fit. I ask, as I've found a supplier than can sell a manufactured as oem one for around 400, if not I'll likely order a used one from Jacks JDM, and take a risk on the seals there. The second question i have is that im replacing the front wiper cowl and have planned to buy 4 new clips and a new center clip but wasnt sure if there were any other clips that would also need to get replaced while I was at it. Given im sure any that are there now will simply break when I remove the old cowl... Last thing would be a fairly straight forward question, i think. If I manage (strong if, finding one has proven to be a pain) to find a R33 GTR spoiler/wing will it require much modification to bolt to a S2 R33 GTST? I've read the bolt patterns dont match but otherwise would bolt in, only options I have found with much luck is China stuff on ebay and carbonetics, which has a nice $650 shipping fee... so if anyone has any pointers where a US chap could locate one that would be great Random side question as well, the mirrors as I understand are mirror glass, and as im planning to polish my windows from water spots and surface scratches, i was hopeful cerium oxide would be fine for them too, as my research points to, but clarification is always nice. Any pointers would be appreciated, and while I have scoured the internet for answers if I missed a prior post somewhere that may answer these directly please point me towards it, as i must have simply missed it. I have seen a post here or there that has mentioned it, but I usually get 50-50 answers, or half answers... I dont have a lot of fab experience or mechanic experience, outside of hydraulic and pneumatic stuff I did in the military and with how hard it is to source stuff in the US, id rather not wing it and hemmoraghe money lol. Thanks guys! Sorry for the monumental first post haha
    • Yep, there's a very minor drift left that happens a few seconds after letting go of the steering wheel, but not enough to bother me. Enjoying the car still!
    • Got you mate. Check your email!
×
×
  • Create New...