Jump to content
SAU Community

Recommended Posts

no, I'm talking right here, right now. Even with better fuels, you are failing.

Do you even know how to tune?

we don't need E85 & meth to make 400rwhp from a 500hp odd turbo (albeit poorly). We do it on normal 98RON unleaded.

See if we added E85 here to that, we'd make around 60rwhp more.

The fact that 3 pages on you have still not grasped the basic concept is nothing short of absurd.

  • Replies 121
  • Created
  • Last Reply

Top Posters In This Topic

im just telling him whats real

-instead of hateing he should be particpating.........

who knows what if this motor makes it to 600whp and lives

-i think its posible

look at our honda motors

a b20 is the thinest sleeves and people would crack the sleeves at 7-9lbs of boost......

for years thats what everyone though...

-now after our test we have quit a few of them at over 20-psi with 400+whp(stock block!)

-from this i say since a stock honda block with tiny rods and weak rod bolts can take 100hp per cylinder

why can t a rb25 factory turbo motor take 100whp per cylinder.......

yeah but US dyno's generally are the happiest dynos on earth..... i have had two freshly imported mustangs make big power in the states 530+hp and ran on my dyno and were missing 150rwhp.....

no, I'm talking right here, right now. Even with better fuels, you are failing.

Do you even know how to tune?

we don't need E85 & meth to make 400rwhp from a 500hp odd turbo (albeit poorly). We do it on normal 98RON unleaded.

See if we added E85 here to that, we'd make around 60rwhp more.

The fact that 3 pages on you have still not grasped the basic concept is nothing short of absurd.

no you only gain about 30whp from e85

we ve tested over and over all our cars r on it even our budget drag car...

Well that is where you guys are clearly having issues.

We gain 30-40rwKW from E85 over out 98RON

QUOTE (Revspeed @ 2 Dec 2010, 05:03 PM) im just telling him whats real

-instead of hateing he should be particpating.........

who knows what if this motor makes it to 600whp and lives

-i think its posible

look at our honda motors

a b20 is the thinest sleeves and people would crack the sleeves at 7-9lbs of boost......

for years thats what everyone though...

-now after our test we have quit a few of them at over 20-psi with 400+whp(stock block!)

-from this i say since a stock honda block with tiny rods and weak rod bolts can take 100hp per cylinder

why can t a rb25 factory turbo motor take 100whp per cylinder.......

yeah but US dyno's generally are the happiest dynos on earth..... i have had two freshly imported mustangs make big power in the states 530+hp and ran on my dyno and were missing 150rwhp.....

thats the problem u need to have them dyno it on a dyno jet 240 the old ones that is not adjustable..................

dynodynamics

mustage dynos

dynopack

and the new dynojet r all adjustable

-the good old dynojet 240 is not..............period............

QUOTE (Revspeed @ 3 Dec 2010, 01:39 PM) why the hell would you run c26 than?

so your running e85 and have troubles with it pinging before reaching MBT?

if not, there wouldnt be any gain in running meth injection

my friend im telling u methanol makes power period................

on e85 u can give it alittle more timing but not much

on methanol u can give it alot more and run it leaner..........

here s an example on 9psi !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

no, I'm talking right here, right now. Even with better fuels, you are failing.

Do you even know how to tune?

we don't need E85 & meth to make 400rwhp from a 500hp odd turbo (albeit poorly). We do it on normal 98RON unleaded.

See if we added E85 here to that, we'd make around 60rwhp more.

The fact that 3 pages on you have still not grasped the basic concept is nothing short of absurd.

did they run enuff octane doing the test?

what broke?

cracked pistons?

spun rod bearings?

u see

thats the info we need to push forward........

my friend im telling u methanol makes power period................

on e85 u can give it alittle more timing but not much

on methanol u can give it alot more and run it leaner..........

here s an example on 9psi !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

more timing isnt always better, but as a tuner you would already know that....

do you know what MBT means?

on methanol u can give it alot more and run it leaner..........

HAHAHAHHAHA, Now I know you have nfi about tuning, Methanol cars need to be fkn rich to make power.

running lean or even Gasoline AFR's on methanol will make less power than Unleaded, might not ping, but wont make any power.

We gain 30-40rwKW from E85 over out 98RON

Nismoid stated 60rwhp.

Are you arguing that 30-40rwKW!!! is somehow much different?

60 x 0.75 = 45........................................... does this make sense?

Do you understand the relationship between HP and KW?

It seems you are struggling to take onboard the common knowledge that 400rwhp is jack all for these cars.

You have mentioned honda blocks cracking because of Xpsi of boost and made note of 200hp record breakers.

What sort of tuner are you and what do you actually tune? Serious question.

Nismoid stated 60rwhp.

Are you arguing that 30-40rwKW!!! is somehow much different?

60 x 0.75 = 45........................................... does this make sense?

Do you understand the relationship between HP and KW?

It seems you are struggling to take onboard the common knowledge that 400rwhp is jack all for these cars.

You have mentioned honda blocks cracking because of Xpsi of boost and made note of 200hp record breakers.

What sort of tuner are you and what do you actually tune? Serious question.

It seems to have merged my post with his LOL :(

I guess thats what i get for posting during the forum update

HAHAHAHHAHA, Now I know you have nfi about tuning, Methanol cars need to be fkn rich to make power.

running lean or even Gasoline AFR's on methanol will make less power than Unleaded, might not ping, but wont make any power.

depends how your reading it. if you use lambda or leave the wideband set to petrol you can run a leaner number with methanol but there will still be more fuel injected than the same afr/lambda on petrol as methanol has a very different stoich to ULP.

on the other hand if you set the wideband to methanol and tune to the same afr's as you would for petrol your right, it'd be way too lean

Edited by JonnoHR31

How come a thread so many times ends up with one page of good stuff and three pages of 'non'-stuff :D

Im very intrested in the topic of this thread but somewhere it went from solid info to convincing HPs on hondas running loooow octane and HPs on E85 Skylines :wub:

How come a thread so many times ends up with one page of good stuff and three pages of 'non'-stuff :D

Im very intrested in the topic of this thread but somewhere it went from solid info to convincing HPs on hondas running loooow octane and HPs on E85 Skylines :wub:

ok guys lets get back on track

-motor is still very healthy

-its been beat on

here is a race that took like 45 min to do lol....(this past friday nite)

1-4 gear burn-outs and all lol......

-i say its time to up the boost.......................................

Edited by Revspeed

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...