Jump to content
SAU Community

Recommended Posts

no, I'm talking right here, right now. Even with better fuels, you are failing.

Do you even know how to tune?

we don't need E85 & meth to make 400rwhp from a 500hp odd turbo (albeit poorly). We do it on normal 98RON unleaded.

See if we added E85 here to that, we'd make around 60rwhp more.

The fact that 3 pages on you have still not grasped the basic concept is nothing short of absurd.

  • Replies 121
  • Created
  • Last Reply

Top Posters In This Topic

im just telling him whats real

-instead of hateing he should be particpating.........

who knows what if this motor makes it to 600whp and lives

-i think its posible

look at our honda motors

a b20 is the thinest sleeves and people would crack the sleeves at 7-9lbs of boost......

for years thats what everyone though...

-now after our test we have quit a few of them at over 20-psi with 400+whp(stock block!)

-from this i say since a stock honda block with tiny rods and weak rod bolts can take 100hp per cylinder

why can t a rb25 factory turbo motor take 100whp per cylinder.......

yeah but US dyno's generally are the happiest dynos on earth..... i have had two freshly imported mustangs make big power in the states 530+hp and ran on my dyno and were missing 150rwhp.....

no, I'm talking right here, right now. Even with better fuels, you are failing.

Do you even know how to tune?

we don't need E85 & meth to make 400rwhp from a 500hp odd turbo (albeit poorly). We do it on normal 98RON unleaded.

See if we added E85 here to that, we'd make around 60rwhp more.

The fact that 3 pages on you have still not grasped the basic concept is nothing short of absurd.

no you only gain about 30whp from e85

we ve tested over and over all our cars r on it even our budget drag car...

Well that is where you guys are clearly having issues.

We gain 30-40rwKW from E85 over out 98RON

QUOTE (Revspeed @ 2 Dec 2010, 05:03 PM) im just telling him whats real

-instead of hateing he should be particpating.........

who knows what if this motor makes it to 600whp and lives

-i think its posible

look at our honda motors

a b20 is the thinest sleeves and people would crack the sleeves at 7-9lbs of boost......

for years thats what everyone though...

-now after our test we have quit a few of them at over 20-psi with 400+whp(stock block!)

-from this i say since a stock honda block with tiny rods and weak rod bolts can take 100hp per cylinder

why can t a rb25 factory turbo motor take 100whp per cylinder.......

yeah but US dyno's generally are the happiest dynos on earth..... i have had two freshly imported mustangs make big power in the states 530+hp and ran on my dyno and were missing 150rwhp.....

thats the problem u need to have them dyno it on a dyno jet 240 the old ones that is not adjustable..................

dynodynamics

mustage dynos

dynopack

and the new dynojet r all adjustable

-the good old dynojet 240 is not..............period............

QUOTE (Revspeed @ 3 Dec 2010, 01:39 PM) why the hell would you run c26 than?

so your running e85 and have troubles with it pinging before reaching MBT?

if not, there wouldnt be any gain in running meth injection

my friend im telling u methanol makes power period................

on e85 u can give it alittle more timing but not much

on methanol u can give it alot more and run it leaner..........

here s an example on 9psi !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

no, I'm talking right here, right now. Even with better fuels, you are failing.

Do you even know how to tune?

we don't need E85 & meth to make 400rwhp from a 500hp odd turbo (albeit poorly). We do it on normal 98RON unleaded.

See if we added E85 here to that, we'd make around 60rwhp more.

The fact that 3 pages on you have still not grasped the basic concept is nothing short of absurd.

did they run enuff octane doing the test?

what broke?

cracked pistons?

spun rod bearings?

u see

thats the info we need to push forward........

my friend im telling u methanol makes power period................

on e85 u can give it alittle more timing but not much

on methanol u can give it alot more and run it leaner..........

here s an example on 9psi !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

more timing isnt always better, but as a tuner you would already know that....

do you know what MBT means?

on methanol u can give it alot more and run it leaner..........

HAHAHAHHAHA, Now I know you have nfi about tuning, Methanol cars need to be fkn rich to make power.

running lean or even Gasoline AFR's on methanol will make less power than Unleaded, might not ping, but wont make any power.

We gain 30-40rwKW from E85 over out 98RON

Nismoid stated 60rwhp.

Are you arguing that 30-40rwKW!!! is somehow much different?

60 x 0.75 = 45........................................... does this make sense?

Do you understand the relationship between HP and KW?

It seems you are struggling to take onboard the common knowledge that 400rwhp is jack all for these cars.

You have mentioned honda blocks cracking because of Xpsi of boost and made note of 200hp record breakers.

What sort of tuner are you and what do you actually tune? Serious question.

Nismoid stated 60rwhp.

Are you arguing that 30-40rwKW!!! is somehow much different?

60 x 0.75 = 45........................................... does this make sense?

Do you understand the relationship between HP and KW?

It seems you are struggling to take onboard the common knowledge that 400rwhp is jack all for these cars.

You have mentioned honda blocks cracking because of Xpsi of boost and made note of 200hp record breakers.

What sort of tuner are you and what do you actually tune? Serious question.

It seems to have merged my post with his LOL :(

I guess thats what i get for posting during the forum update

HAHAHAHHAHA, Now I know you have nfi about tuning, Methanol cars need to be fkn rich to make power.

running lean or even Gasoline AFR's on methanol will make less power than Unleaded, might not ping, but wont make any power.

depends how your reading it. if you use lambda or leave the wideband set to petrol you can run a leaner number with methanol but there will still be more fuel injected than the same afr/lambda on petrol as methanol has a very different stoich to ULP.

on the other hand if you set the wideband to methanol and tune to the same afr's as you would for petrol your right, it'd be way too lean

Edited by JonnoHR31

How come a thread so many times ends up with one page of good stuff and three pages of 'non'-stuff :D

Im very intrested in the topic of this thread but somewhere it went from solid info to convincing HPs on hondas running loooow octane and HPs on E85 Skylines :wub:

How come a thread so many times ends up with one page of good stuff and three pages of 'non'-stuff :D

Im very intrested in the topic of this thread but somewhere it went from solid info to convincing HPs on hondas running loooow octane and HPs on E85 Skylines :wub:

ok guys lets get back on track

-motor is still very healthy

-its been beat on

here is a race that took like 45 min to do lol....(this past friday nite)

1-4 gear burn-outs and all lol......

-i say its time to up the boost.......................................

Edited by Revspeed

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...