Jump to content
SAU Community

Recommended Posts

Looking at a second hand r34 gtr that had a Fuel air controller installed and I was wondering if they are a bad thing for engine life. I would think that most GTR's would have had some mods done to them so was just wondering if I should expect some extra engine wear because of it, and what things I might need to have checked etc. Thanks if anyone has any advice.

By air/fuel controller are you referring to piggybacks? (Apexi SAFC is an example). As for engine life? If they are poorly configured/tuned then yes.. standalone ECU is always the best option, but not the cheapest.

By air/fuel controller are you referring to piggybacks? (Apexi SAFC is an example). As for engine life? If they are poorly configured/tuned then yes.. standalone ECU is always the best option, but not the cheapest.

Yes I think so, but I only had a picture to go pre compliance and its since been removed before it was available for inspection. I could only go on what the salesman told me. I will attach a picture if anyone could confirm that it is an air/fuel controller.

post-78962-0-94382300-1291952307_thumb.jpg

that looks like a HKS EVC, which is a boost controller

i dont think HKS make piggyback AFC's that look like the EVC model

Yep just googled HKS EVC and its a splitting image for the HKS EVC 4 boost controller, I guess the salesman would prefer I didn't know that. Jeez its hard to find an honest used car salesman. No wonder he said it won't be going back on after compliance work seeing how much it is worth. Thanks for spotting that paul

technically speaking a car can't be complianced with aftermarket mods (has to be returned to stock), and any aftermarket parts aren't allowed to be reinstalled after the compliance. don't think they are allowed to even sell them (although a lot do). i could be wrong though.

  • Like 1

technically speaking a car can't be complianced with aftermarket mods (has to be returned to stock), and any aftermarket parts aren't allowed to be reinstalled after the compliance. don't think they are allowed to even sell them (although a lot do). i could be wrong though.

Yes that makes sense, don't know why he lied about it being something else though.

Fairly new to all of this so I guess I should ask is there anything I need to make sure of when they took it out, something capped off, modified ecu, missing sensors or something like that or is it a fairly straight foward thing to install and then remove.

EDIT: I found a diagram showing how its all connected and it looks like the only area I need to worry about is the wastegate. Seems that the HKS EVC is one of the better ones so I am hoping that the engine won't have suffered too much from the overboosting.Thanks everyone for your help as its going to be a steep learning curve for me.

Edited by thatlbeme

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...