Jump to content
SAU Community

Recommended Posts

that 350z was featured in fatlace, those rims are just dope, the guy filled em up with beer bottles, thats how deep they are!!!

i rate that style of rims a 7/10, but its just something about them and that style........

I must be from a different era or something, because every single one of those cars makes me want to vomit and kill my neighbours. Those wheels on the 350Z look like an absolute abortion and I would be embarrassed to drive to a slaughter house rolling on those.

But hey that's the great thing about different tastes, makes every car that little bit different.

  • Like 1

As every one has said those rims suit a VIP style, I've got a set on the E50 elgrand, but if you put them up next to my series 2 stagea they just look crap.

that said i think te37s or "tuner" style rims would look woeful on the elgrand!

DSC01258.jpg

Your right, we are talking about wheels, not mass murder and gastro.

I have no dish on my wheels, So theres no kettle or black pot calling.

But once again, Each to their own...... you know this being the stagea section and all....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...