Jump to content
SAU Community

Recommended Posts

Ok, here's the story,

I started my drive from canberra to the Gold Coast at around 11 30 on sunday arvo. The car (my R33) was going really well, loving the highway and the room to stretch her long legs. I was sitting pretty until we hit the light horse interchange and I noticed that the temp guage had moved to about 3/4 I thought it could have been because of the long drive and I was running everything, So I turned off the aircon and kept going. We got off the highway to head through sydney and the first set of lights we hit the temp gauge jumped right up the the line before the 'H" so I pulled over and there was water pissing out of the overflow bottle. I let her sit and called NRMA, he came out and notice a few small leaking pipes but nothing major. And jeremy told me about a manual overide switch for the thermo fan. SO at about 5pm I started off again. Once again just plowing along. I was fine until 0300 when I was just north of Coffs Harbour and I heard a strange noise when I hit one of the thousand pott holes in that road. I heard it again about 30 seconds later, still not sure what was going on. So I looked down at the dash and noticed the battery light was off, once again I was running everything so I just turned off the radio. As I went around the next corner I noticed the power steering had died. Anyway I was about 2 mins from a servo so I pulled in there and had a look in the engine bay and there is my Harmonic balancer sitting off at a really bad angle.

I got towed into woolgoolga and they confirmed (the next day) that the crank had been totally flogged out. So in the next week she's getting a new crank, new harmonic balancer, new bearings, new oil pump, new thermostat for the radiator, and new radiator lines.

OK well now that's off my chest lol.

To make this topic interesting how about people post up their own "epic journeys" where everthing has just gone wrong

Cheers,

OB

Link to comment
https://www.sau.com.au/forums/topic/347498-the-epic-journey/
Share on other sites

Pissed n Broke now? I can tell you own a Skyline.

As we blokes say "tits n wheels will send you broke".

I liken it to be a bit like marriage, but at least you can fix a car up.....

A lot less expensive too :P

Yeah I have that problem too... A boob job would cost about 10k... Plus car expenses...

Nah it's being rebuilt with decent parts. The cheap part is the larbour. The guy only charges 77$ an hour. Nispro wanted 180$ an hour for labour. But yeah i'm putting all dencent parts in it like ACL race bearings, I geniune RB26 crank (gonna see how much an HKS drop forged crank is) and loads of other stuff I can't remember

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...