Jump to content
SAU Community

Recommended Posts

Drag Combat

April 10th at Kwinana Motorplex

There is a round of Drag Combat being held in Perth on the 10th of Arpil and SAUWA is looking for people interested in entering as a team. Skylines Australia is supporting the event with advertising and teams are entering around the country with the 1st round having been completed in NSW at the WSID (Western Sydney International Dragway).

You don't need to have a 10sec car to be able to compete, aslong as it's able to do a 14.99 pass or better then your eligible. We're not restricting it to just Skylines either, any Jap Import owner who is a SAU forum member is more than welcome to join us, and I believe cars with engine translplants are eligible aslong as the engine is from the same manufacturer.

There are prizes to win, and the event will be shown on FOX SPORTS, so if you have sponsorship this may be a good way to get some exposure. There are different categories of racing, including a category for street tyres. Further details can be found at www.dragcombat.com .

There will be a Show'n'Shine and SPL comp, but if you just want to race then you don't have to enter them:D

I'm talking to the organiser to get a discount for SAUWA entrants, and will let you know ASAP what the discounted rate will be.

Please register your interest, and support this event.

Paul

President of SAUWA

Entrant List:

GTS-t VSPEC - R33 GTS-t

SHUTO BOY - R33 GTS-t

DSTURBD - R31

RB20LAGWAGON - R31

ROB77 - R33 GTS-t

REP003 - R33 GTS-t

Link to comment
https://www.sau.com.au/forums/topic/34755-drag-combat-1004-who-wants-to-enter/
Share on other sites

  • Replies 109
  • Created
  • Last Reply

Top Posters In This Topic

haha. wikkid aidwin.

wing 55 - unholy dragstip warrior.

I will probably not be in on this one, due to the fact that my car is slow, and my wallet empty, thereby precluding any change from the current scenario of car slowness.

:)

but I will be there - and may spl it up if required.

Sean, We have a few decent cars, may even have an 8sec GTR making an appearance, but have to wait to hear back:D

Once we've confirmed some more people, then we'll get together to discuss what brackets, dial in's and tyres we can use. We can always have a couple sets of slicks that we share between some cars.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
×
×
  • Create New...