Jump to content
SAU Community

20 Inch Wheels On R33 (Work Meisters)

Granthem
 Share

Recommended Posts

alr33x Grand Master

alr33x

Posted
Posted

20s look stupid on the front of skylines the lack of tyre sidewall and the raised hieght is ridiculous..

Now if your were to pick up some 18s for the front,it will make your steering easier and better, it will make your your frontend lower giving the car a mean rake with the front being slightly lower than the rear and generally all your problems will be solved and your car will look tuff as balls..

Thats my 2c anyway ,if you wanna keep your stupid 20s on the front then i have no further advice..

yeh agree

but 18s front 20's rear is even more gay.

ARTZ Grand Master

ARTZ

Posted
Posted (edited)

yeh agree

but 18s front 20's rear is even more gay.

see i dunno cause i havent seen it done yet..usually people only have an inch difference between front and back, remember seeing a S14 with 18s and 19s and it looked shit hot, same goes for 17s-18s on skylines.. i see alot of the street machine crowd do 18s and 20s (or 20s and 22s) and it can look really tuff, but yeah, thats a different style of car..Yet to see it on a skyline..I think the main thing really is to have the tyre sidewalls close to the same size so everything looks in proportion.. :thumbsup:

Edited by Arthur T3
Granthem Mentor

Granthem

Posted
  • Author
Posted (edited)

I definitely wouldn't go 2 inches smaller on the front. Placing these things next to my current 18s makes them look like 16s.

It would be too bigger difference. 19 up front, 20 on the rear I have seen done before.

But honestly its all work to chase up. 20s all around is easier, because i already have them :D Sure I cant lower the front to the ground, but considering I get pulled up nearly weekly and checked for ride height, that doesnt bother me.

This car is a daily, so i cant slam it and camber it as much as I'd like :(

Edited by Granthem
Taleb Tyres Proficient

Taleb Tyres

Posted
Posted

I like how you added work meisters after the 20" so as not to get flamed( as bad!)

245 40 is way too big for the R33(looks like bad camber wear so they need changing anyway). if you didnt want to run a 225 30 20 you could run a 235 30 20 for the front.

By doing this you wont have to do any grinding, but if you had to you could grind away at the little lip of the upper control arm.

Does the tyre bulge out past the rim? because with a 8.5" +25 the wheel shoudnt be that close to the side of the arm?

Granthem Mentor

Granthem

Posted
  • Author
Posted

I like how you added work meisters after the 20" so as not to get flamed( as bad!)

245 40 is way too big for the R33(looks like bad camber wear so they need changing anyway). if you didnt want to run a 225 30 20 you could run a 235 30 20 for the front.

By doing this you wont have to do any grinding, but if you had to you could grind away at the little lip of the upper control arm.

Does the tyre bulge out past the rim? because with a 8.5" +25 the wheel shoudnt be that close to the side of the arm?

Haha I knew it would turn to a flame thread unless I was clear on the type of rim!

Yeh the tires on the rims are rooted, so Ive got the chance to start a fresh and make sure it all fits correctly on my car. I think I'll run a 225 up front just to be safe.

And I am thinking a 235/30 on the rear rim (9.5inch wide).

Thats the plan atm, trying to keep the rolling diameters sorta close between front and back (throwing a 225 on 9.5 inch rim isnt a good idea imo, so ill have to go bigger at the rear)

No the 245 doesnt bulge atm, the wheel is slightly turned in the pics, making the tire look like it sits further under then it really does (when straight)

  • 3 weeks later...
Granthem Mentor

Granthem

Posted
  • Author
Posted

Using the 1010tires calculator even a 245/30/20 will have a smaller rolling diameter then the current 245/45/18 I am running up front. Rolling diameter is reduced by 677.67mm to 654.81mm with the 245/30/20.

So its probably just easier to run with 245/30/20s all around.

Any opinions on this?

  • 1 month later...
  • 2 weeks later...
islade Rising Star

islade

Posted
Posted

Can I ask what you ended up needing to do to make this all fit?

I've just found some 20" D1R's that i think would look amazing on my R33 GTST

I've got rolled guards front and rear, and flared rears

Currently running 18x +30 all round with 25mm bolt on spacers on the rear and it looks neat.

Thinking of going 8.5 +32 fronts and 10" +32 rears with the 25mm spacer :)

Is 235/30 tyres the secret to front fitment, or is there more to it than that?

Isaac

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...