Jump to content
SAU Community

Recommended Posts

you just said you rarely rev it past 3000rpm

why do you think it must be some torque monster down low? it's a 2 litre straight 6

you will get more torque down low fro ma 4 cylinder because the pistons are bigger, the trade off is that being a 6 cylinder it will rev higher and easier

sell your car now because you have no idea

Edited by mystery_kid

Hey all,

I purchased my r32 only like a month or 2 ago.

The car feels very slow/sluggish until boost kicks in.

I get munched by little yaris/jazz/swifts etc... at the lights (just driving normally)

Boost on car does not kick in until atleast 4-4.5k!

Car has fair bit of work done to it.

CAI

Pod

FMIC

3" TBE

Pon cams

Cam gears

Bigger injectors

Better coilpacks

Z32 AFM

Upgraded fuel pump

Bigger turbo

Nistune ecu (can't remember if that's the correct name)

Few other bits.

I hardly ever floor/race my car as turbo lags and it drinks so much petrol... i'm a GRANNY driver! LOL.

However when i drive normally it's so slow/sluggish... all these cars just overtake me and the ones driving behind me get's frustrated that i'm so slow.

Car does not feel like a straight 6 down low in the rev unless turbo kicks in. Getting overtaken and beaten by 1.3L is a disgrace!

Is this normal or what's up with the car?

Any advice/help would be great.

Thanks guys.

Ok dude I have exactly the same set up as you minus the cams and cam gear and I make 230 rwkw on my rb20det.

The RB is very reluctant to release torque before 3000rpm. Remember...

1) It's a turbo and turbos are designed to make power when they are on boost - NOT ON VACCUM. My boost starts to come on at about 3300 rpm and this is when the car starts to become torquey and fun.

2) Its a tiny displacement 6cyl turbo with less combustion to push more cylinders than any other nissan inline turbo.

With this said however there are a couple of things you can do to combat the lag (apart from getting a tune which I would recommend first as mine is not very laggy even down low)

1) Regap plugs to 0.8mm

2) Buy a performance flywheel

3) Get a proper, sealed and insulated cold air intake...any exposed pods in the engine bay will be sacrificing horses due to heat.

4) Practice launching the car as you get next to no lag off a good launch and this can be a drag launch or an every day town launch

5) Swap in an rb25det (which i personally could never bring myself to do as the rb20 is the sweetest sounding engine in the world)

James

i rarely got past 3k.

so ur saying if i keep all gear changes under 3k without kicking the turbo in then from stat to finish ill always be slower/behind other cars?

even lilttle 1.3,1.5L etcc are faster/ahead of me?

dunnoo. if u guys get what i'm talking about but yer... maybe u needa be in the car to understand..

everyone that sits in my car thinks its slow cos i keep it under 3k and not let the turbo kick in... but boy do they get a surprise when i rev it though..

lollll..

i'll get a retune and fix a few little stuff and see how i go..

=)

Lol rb20s are crap down low with the stock turbo, one making 240kw will be absolutely gutless below 3.5k, I wouldn't be surprised if 1.5L non vtec civics and barinas are faster off the line due to the conservative cams and variable valve timing they have.

You NEED to rev it to go anywhere, I'm talking 4.5k for daily driving otherwise why the hell did you buy it? should have just bought a commodore if you want to drive around at 3k lol. The fuel economy should be fine revving it out with daily driving, my 240kw rb25 gets a beating everyday and it manages 14.5L/100km with stop start peak hour driving so I really can't see how you could be worse than that, you would be lucky to get it below 12L/100km anyway.

So drive it like a skyline or sell it, I don't understand why anyone would buy a skyline and drive it under 3k everyday, it is a puny little 2L six, that is equivalent of a 1.3L 4 cylinder if you take 2 cylinders off it lol, TINY engine with cams and a turbo that suit high revs.

Its a short stroke, low compression engine, I have no doubt that a lighter non turbo eccono box is faster in that rev range, its what they are designed to do, where as the RB20 is designed for revs (short stroke) and boost (Low compression)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • These coils draw 10amps that what i read online
    • I appreciate the detailed explanation, think I understand now. I spent the better part of last night reading what I could about shuffle and potential solutions. I had replaced the OEM twin turbo pipe with an alternate Y pipe that is separated further away from the turbo. The current one is from HKS and I had a previous pipe that was separated even further away, both have shuffle. I had heard that a divider can be welded in to the OEM pipe to remove turbulence, and figure that aftermarket pipes that are more separated would achieve the same thing. From what I read, most people with -10 turbos get shuffle due to their size, though it's a bit less common with -5s on a standard RB26. I think Nismoid mentioned somewhere it's because OEM recirculation piping is common in Australia with -5 cars. It seems that the recommendation tends to vary between a few options, which I've ordered in what I think is most feasible for me:  1. Retune the MAP or boost controller to try to eliminate shuffle 2. Install OEM recirculation piping 3. Something called a 'balance pipe' welded onto the exhaust manifolds. I don't know if kits for this are available, seems like pure fabrication work 4. simply go single turbo My current layout is as follows: Garrett 2860 -5s HKS Racing Suction intake MAF delete pipes HKS racing chamber intake piping hard intercooler piping,  ARC intercooler HKS SSQV BOV and pipe Haltech 2500 elite ECU and boost solenoid/controller HPI dump pipes OEM exhaust manifolds HKS VCAM step 1 and supporting head modifications Built 2.6 bottom end All OEM recirculation piping was removed, relevant areas sealed off I'll keep an eye out for any alternative solutions but can get started with this.  Only other question is, does shuffle harm the turbo (or anything else)? It seems like some people say your turbo shafts will explode because of the opposing forces after a while and others say they just live with it and adjust their pedal foot accordingly. 
    • That worked out PERFECTLY! Thank you big time to JJ. He was able to swap me his stock diff. He drove all the way to me as well. Killer! Removal & install was pretty straightforward. The diff itself is HEAVY. So that’s a 2 man job.  Man does the car drive nice now! Couldn’t have worked out any better 👌
    • I'm interested,do you still have it?
×
×
  • Create New...