Jump to content
SAU Community

Recommended Posts

ok so i guess you all remember how my intercooler copped a tow ball not long ago and i have been waiting for insurance etc etc, well it got assessed last week n while i was there the guy just kept asking me why its costing $1750 for a replacement intercooler kit, i told him about 30 times that it comes from japan is a brand new kit blah blah, at first the idiot thought it was my radiator!!!

anyways i get a call from him today saying he doesnt want to go through my nominated place (UPI) as he found somewhere closer to me and cheaper that can 'repair' the cooler

he said they will be able to replace the core with a brand new core and it will be good as new, so of course i asked if they were buying brand new TRUST V-SPL cores form japan, and he said he didnt know, i asked the location of the placem he said brunswick

so i turned on my boost n started to turn red, trying not to scream at him explaining that they would have $20 truck cores lieing in their bedrooms that they will take out my lovely designed TRUST core n replace with some dodgy aussie shit that wont do 1/10 the job, he just didnt know wtf i was talking about n kept explaining this radiator place claimed they've fixed hundreds of intercoolers etc, and i was saying yer and i bet the cars belonged to a lot of nuff nuff VL drivers that dont care as long as their car sounds 'fulsick moit' (sorry for generalising im just angry)

so yer in the end he cracked it at me and just said 'well fine take it all the way down to morrabin to get fixed, i was trying to make it easier for you.... i was like wtf, but you cant promise me im getting another brand new V-SPL intercooler kit from brunswick and he said true and that was basically it, so i WILL be getting my V-SPL kit from UPI when i head down there AAMI are calling them etc saying that they can go ahead and replace it blah blah

w00t, end spiel ;)

feel better now ;)

Link to comment
https://www.sau.com.au/forums/topic/34816-omg-i-was-about-to-go-postal-on-aami/
Share on other sites

People that work at insurance companies are like cops, 90% of em dont know shit about cars and they are the people trying to tell us what we can and cant do with our cars! :bs!:

Insurance assessors don't know jack about anything. When I was a Pro cyclist (a few kg lighter and no stuffed back then) a removalist tried to twist the headstem of my track cycle sideways and snapped the rim clean in half...and the assessor was saying "It's just a bike...why does a new rim cost $600 to replace?" Well new aero blade spokes for $80 and the rim was $400 and the buildup with wired and soldered one cross was $120. "but it's only a pushbike"

They have no idea of a quality components value and I'm glad you won DJ.

First like to say that i agree with ya 100% in fighting for the Trust cooler, as you had out-laid all that money for one.

But, for those who have not used truck cores doen't knock it till ya have experienced one and found it bad, first hand. My car has been running with a truck core for the last year and a bit, and the inlet temps are always at least a couple of degrees below ambient. Even Sam (Dr. Drift) was surprised how low the inlet temp was (compared to ambient), when i gave him a left home from the last GOR cruise :D.

First like to say that i agree with ya 100% in fighting for the Trust cooler, as you had out-laid all that money for one.

But, for those who have not used truck cores doen't knock it till ya have experienced one and found it bad, first hand.  My car has been running with a truck core for the last year and a bit, and the inlet temps are always at least a couple of degrees below ambient.  Even Sam (Dr. Drift) was surprised how low the inlet temp was (compared to ambient), when i gave him a left home from the last GOR cruise :D.

yep you were happy wit yours and i know you have been since u had it, but remember my VMS cooler ? hehe im sure u do how could u have missed it LOL, so yer thats the only reason i was so angry at them

and im not insured with AAMI, im actually with Just Cars (AAMI anyways) but yer the dude who hit me claimed it from his policy

Nathan, i totally agree with you buddy. If i spent $$$$$ on anything and it got damaged by some f@rkwit that couldn't park, i too would accept nothing less than the same quality product, and there isn't alot that match the R&D of a TRUST ic.

I was refering to Rob's sarcastic remark :). I know he was only f@rking around. But truck cores are not all that bad.

You tell'em Noof!!! about time that was sorted! I have had assesors tell me that i will not see a cent from a write off because the insured at fault was drunk! she was asleep! not drunk! I could have killed him! and if i remember his name at a c0cktail party one day he will enjoy a smashed tooth daccari, with a testicular twist!!!

wid or widout da sexy biaches, you is a well sick ****.

oweva, feel free to adorn your beast wid well fit eye candy so we may all enjoy, and of course dis will increase your status as a pimp!! aiiiiiiii

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...