Jump to content
SAU Community

Intercooler Kit

Komet

By Komet,
in Engines & Forced Induction

 Share

Recommended Posts

Komet Contributor

Komet

Posted
Posted

Hi guys,

I have just recently had a new intercooler kit installed, and I thought I would like to share the design with you guys.

It's all CNC mandrel bent one piece aluminium tubes, and I don't think there's anyone else who has this design in Australia.

From the pics you can clearly see that it does not require alot of piping, and there is no need to cut the radiator fan.

All the tubes are replaced, including both the factory compressor inlet and outlet.

The cooler is a light weight tube/fin core, and the end tanks are made from light weight, pressed sheet aluminium.

What do you guys think of the kit??

Link to comment
https://www.sau.com.au/forums/topic/34869-intercooler-kit/
Share on other sites
Komet Contributor

Komet

Posted
  • Author
Posted

xRHETTx - all up it cost me close to $1,700

The business is performance manufacturing and they're located in Wetherill Park NSW.

I don't think they have a R32 kit at the moment, but they can do it in a reasonable quick time.

You can give them a call on 9756 0495 and ask for Mark

Link to comment
https://www.sau.com.au/forums/topic/34869-intercooler-kit/#findComment-697776
Share on other sites
FORCE Explorer

FORCE

Posted
Posted
Hi guys,

I have just recently had a new intercooler kit installed, and I thought I would like to share the design with you guys.

It's all CNC mandrel bent one piece aluminium tubes, and I don't think there's anyone else who has this design in Australia.  

From the pics you can clearly see that it does not require alot of piping, and there is no need to cut the radiator fan.  

All the tubes are replaced, including both the factory compressor inlet and outlet.

The cooler is a light weight tube/fin core, and the end tanks are made from light weight, pressed sheet aluminium.

What do you guys think of the kit??

Hi Nick. Glad you are happy with it :D

Here is a pic of the "Titanium Look" anodized pipes I spoke to you about.

PICT0030.JPG

David's pipes are ready to pick up from the anodizers so we will get them tomorrow. He decided to go with purple. We are also picking up the pipes for the EVO, which are red. I can't wait to see how some different colours look on the cars. I am thinking of making up a GTS-T kit in the same colour as shown above.

We could swap yous for the anodized ones you know....... :D

Link to comment
https://www.sau.com.au/forums/topic/34869-intercooler-kit/#findComment-698224
Share on other sites
TTT Grand Master

TTT

Posted
Posted

Guys..

Do a search for the Gibson Motor sport R31 race car.

that is very similar design from the throttle body to the cooler.

Actually, the Gibson motor sport bend was even tighther than that and they made some ridiculous power from the RB20 back then..

BOOSTMEISTER from these forums had a similar set up.

I believe that SydneyKID uses this type of setup on the RB20/RB25 motor intercooler pipes..

If I ever get another skyline, that is how I will go about it..

It probably saves about 1 meter of pipe work (maybe a little less) AND, your pipes no longer go over the radiator fan and turbo before it goes in to your engine.

BTW, the Titanium look is brilliant.. best looking pipes I have seen.

Link to comment
https://www.sau.com.au/forums/topic/34869-intercooler-kit/#findComment-698279
Share on other sites
FORCE Explorer

FORCE

Posted
Posted
Anyone else have a problem with the U bend out of the cooler to the plenum? looks a bit tight to me.

More then 90 degree bends on cooler piping is bad from what ive learnt

What you are saying is partially correct, but all kits are a compromise of many factors. Unless you are going to change the plenum, our kit has less bends than any other kit on the market (as far as we are aware). The bend you are talking about is exactly 160.5 degrees, and eliminates the two 90 degree bends found on most kits. We also change the pipe from the turbo to the inner guard, further reducing the number of bends.

Any way, to cut it short, I agree with what you are saying but I think we have done the best we could to minimise the number of bends, and the lenght of the pipes.

Link to comment
https://www.sau.com.au/forums/topic/34869-intercooler-kit/#findComment-698304
Share on other sites
FORCE Explorer

FORCE

Posted
Posted
Guys..

Do a search for the Gibson Motor sport R31 race car.

that is very similar design from the throttle body to the cooler.

Actually, the Gibson motor sport bend was even tighther than that and they made some ridiculous power from the RB20 back then..

BOOSTMEISTER from these forums had a similar set up.

I believe that SydneyKID uses this type of setup on the RB20/RB25 motor intercooler pipes..

If I ever get another skyline, that is how I will go about it..

It probably saves about 1 meter of pipe work (maybe a little less) AND, your pipes no longer go over the radiator fan and turbo before it goes in to your engine.

BTW, the Titanium look is brilliant.. best looking pipes I have seen.

Yeah, what he said! :D

Thanks for the compliment on the pipes.

Link to comment
https://www.sau.com.au/forums/topic/34869-intercooler-kit/#findComment-698312
Share on other sites
TTT Grand Master

TTT

Posted
Posted

red17.

once it gets under the car, you will require MORE pipes and tighter bends to get to the other side of the cooler on the drivers side.

There are kits that have one outlet on the drivers side of the intercooler come out on the bottom on a sharp angle and have a pipe running along the bottom of the cooler but I'm not sure if it has good flow characteristics at that EXIT point on the drivers side.

Link to comment
https://www.sau.com.au/forums/topic/34869-intercooler-kit/#findComment-699550
Share on other sites
RB20LagWagon Proficient

RB20LagWagon

Posted
Posted

The thing we are trying on our intercooling here in the west is to go to the far side(drivers side) of the intercooler first then come through the cooler and exit on the passenger side and it goes over the stock path from there on. thus after the cooler all bends are minimal and soft

Link to comment
https://www.sau.com.au/forums/topic/34869-intercooler-kit/#findComment-699585
Share on other sites
red17 Experienced

red17

Posted
Posted

RB20LagWagon,

Thats effectively what my cooler (currently being stored in my wardrobe) does. My drivers (inlet) side tank has been modified so that I can run a pipe behind the core back to the stock piping on the passenger side. This requires minimal bends, next to no custom work because its basically a straight bit of pipe with one bend on the end.

GTST. you dont use that end of the core as the EXIT point, you use it as the ENTRY point so that the air has the shortest distance and least amount of time to be heated up on its way into the engine. If you had the end tank modified properly the effect can be minimised. ALOT of japanese kits do this for the RB20/25 motors, so it cant be that bad.

Red17

Link to comment
https://www.sau.com.au/forums/topic/34869-intercooler-kit/#findComment-700188
Share on other sites
FORCE Explorer

FORCE

Posted
Posted
RB20LagWagon,

Thats effectively what my cooler (currently being stored in my wardrobe) does. My drivers (inlet) side tank has been modified so that I can run a pipe behind the core back to the stock piping on the passenger side. This requires minimal bends, next to no custom work because its basically a straight bit of pipe with one bend on the end.

GTST. you dont use that end of the core as the EXIT point, you use it as the ENTRY point so that the air has the shortest distance and least amount of time to be heated up on its way into the engine. If you had the end tank modified properly the effect can be minimised. ALOT of japanese kits do this for the RB20/25 motors, so it cant be that bad.

Red17

That is the easiest way to do a kit for the GTS-T, but although the kit only needs a minimal amount of piping, the total length of piping once installed is huge!

Link to comment
https://www.sau.com.au/forums/topic/34869-intercooler-kit/#findComment-701491
Share on other sites
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      Rust repairs completed, doors back on! pretty much totally back together running now. All future repairs will be fiddly wiring getting everything back up to road condition.  hasn’t  taken that long considering the condition I got the sub. note my helpers keeping the back seat warm 😂
    • Keeper
      SAU NSW - Old Pac Cruise to Newcastle All Japan Day 2025

      By Keeper · Posted

      SAU NSW Old Pac Cruise to Newcastle All Japan Day 2025 Sunday 27th July 2025 5:00AM Meeting Berowra Station Commuter Car Park 2 5:15AM Departure Cruise Via Old Pacific Hwy 7:45AM Arrival to Lambton Pool (Regroup) 8:00AM Arrival to Newcastle All Japan Day 2025 Meet Location: Berowra Station Commuter Car Park 2 Stop 1: Lambton Pool (Carpark) Final Destination: McDonald Jones Stadium for Newcastle All Japan Day 2025 Tickets: Newcastle All Japan Day 2025 $20 Per Car Spectators Free PURCHASE TICKETS HERE *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Keeper
      SAU NSW - Machines & Macchiatos Cars and Coffee

      By Keeper · Posted

      SAU NSW Attends Machines & Macchiatos Cars and Coffee Sunday 13th July 2025 7:00AM Meeting Davidson Park 7:20AM Departure 7:45AM Arrival at Northern Beaches Christian School Meet Location: Davidson Park Final Destination: Northern Beaches Christian School Machines & Macchiatos Tickets: $10 Per Car $2 Spectators Pay at Gate LIMITED SPACES Register Below to Reserve your Spot. Members Receive Preference REGISTER HERE   *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Ozdavroz
      Starting again

      By Ozdavroz · Posted

      Thanks heaps Duncan and GTSBoy. I'll get my old man to sit in the driver's seat and turn it on and off while I test with the meter. Or maybe other way round, depending on whether he remembers where his glasses got to
    • GTSBoy
      Starting again

      By GTSBoy · Posted

      This is the GTR fuel pump. Yellow shows 12V, orange shows earth. The ECU provides the earth to activate the fuel pump relay. The ECU side of teh relay will pull low when the ECU activates. This is the RB20 fuel pump. Almost the same, but a little simpler. You can see I indicated (above) where the 12V line goes down to the RB20 diagram on the overall diagram, whch shows both RB26 and RB20. This is where I show it coming in on the RB20 diagram below. You can see that the dropping resistor is handled differently. When the fuel pump control is not providing earth to the pump, the pump earths through the dropping resistor and thus runs at lower voltage (some is wasted over the resistor) and runs slower. I showed that "not 12V and not quite earth" portion of the wiring in a paler orange. The rest of the wiring that I did not colour on that little section below the pump would be orange when the fuel pump coontroller is providing earth. This drop is handled inside the fuel pump controller in the GTR. Regardless, you can see where 12V is supposed to be, where earth is supposed to be. The key on prime is via the ECU providing the pump for only a few seconds the switching off. You should be able to see that happen.
×
×
  • Create New...