Jump to content
SAU Community

Recommended Posts

Hi Guys, I'm new to this forum but would like to try and get some answers please. I've been looking around at several dealers to buy a 2008 Skyline 370GT or later and whilst the pricing varies (give or take $5K) all the vehicles I've looked at generally have mileage under 10K. Now call me old fashioned, but this makes me very suspicious that the odometer has been wound back either in Japan or here, particularly since they are all 2007 or 2008 models. Is there any other logical reason as to why the mileage is so low or is my suspicion correct? Any help would be appreciated, as I don't want to end up with a car that has had 50-100K wound off the odometer.

Link to comment
https://www.sau.com.au/forums/topic/348968-imported-skyline-odometer-readings/
Share on other sites

I'd be requesting from the seller, the auction sheet, deregistration form for the car and also the service manual for the vehicle, K's marked on these should be consistant with the odometer reading. If the seller can't come up with one or more of these be very careful going ahead, personally I would walk away given the prices dealers are asking for these.

Less than 10000ks the car should look virtually new. No wear on pedal rubbers, switchgear and the like. Have a look around the driver's door jamb for signs of dealer service stickers (or remnants of) that may have been removed to conceal the true ks.

Thank you, your advice is much appreciated - knowing little about these types of imports what you have given me will be very useful. Thanks Again.

I'd be requesting from the seller, the auction sheet, deregistration form for the car and also the service manual for the vehicle, K's marked on these should be consistant with the odometer reading. If the seller can't come up with one or more of these be very careful going ahead, personally I would walk away given the prices dealers are asking for these.

Less than 10000ks the car should look virtually new. No wear on pedal rubbers, switchgear and the like. Have a look around the driver's door jamb for signs of dealer service stickers (or remnants of) that may have been removed to conceal the true ks.

Admittedly I was pretty skeptical myself when I was purchasing. I even came across a 2007 V36 with only 900km. According to my agent, extremely low km cars come up a lot and is normal.

In the end I purchased a 2007 with ~6000km. Was told by the agent that the condition was consistent with kms. When I got the car, they weren't kidding. Interior was basically brand new, even with the smell. Service manuals also looked legit and were consistent. Paintwork was a bit worn, not bad, but not great. I put that down it being a black car, and most likely the car spent most it's time outside. Nothing a weekend with meguiars couldn't fix.

Even the compliance workshop commented on how new it looked. Actually made it easy for them to comply and get it through quickly.

It probably pays to use a reputable agent for that assurance. I used prestige motorsport and they were first class. Highly recommended.

Edited by SyKRyD

Thank you for your comment and advice, it's also appreciated.

Admittedly I was pretty skeptical myself when I was purchasing. I even came across a 2007 V36 with only 900km. According to my agent, extremely low km cars come up a lot and is normal.

In the end I purchased a 2007 with ~6000km. Was told by the agent that the condition was consistent with kms. When I got the car, they weren't kidding. Interior was basically brand new, even with the smell. Service manuals also looked legit and were consistent. Paintwork was a bit worn, not bad, but not great. I put that down it being a black car, and most likely the car spent most it's time outside. Nothing a weekend with meguiars couldn't fix.

Even the compliance workshop commented on how new it looked. Actually made it easy for them to comply and get it through quickly.

It probably pays to use a reputable agent for that assurance. I used prestige motorsport and they were first class. Highly recommended.

I used Prestige Motorsport too, Geoff is great.

My DEC 2007 V36 had 10,600kms on it, as per the auction sheet and the service manuals. Mind you I paid a bit more at auction for such a low KM car, the value IMO is to be had with the ones with 'high' KMs. One similar spec/colour sold with 50,000kms for considerably (i.e. $15k) less. If it's well looked after that's somewhat irrelevant.

I wouldn't touch a local one if they didn't have books or auction papers, cars that new should almost always have them.

  • 2 years later...

Looks like you've already got all the information you need, it's not uncommon for these cars to have very low km's coming from Japan where they don't do alot of driving especially if the car lived in the city.

Most important thing i think would be just determining how clean the interior is for it's age & km's check common wear parts of the car such as tears in the leather, possibly a bit of wear on the gear knob, steering wheel then overall condition.

goodluck

also you should have the auction sheet and the inspections sheet. My car had two inspections and the KM's lined up over all of that time. Mines done 80,000 over 10 years now which is pretty high, but it was from a more regional area of Japan

Umm. I think you are replying to Haxorz's post made 2 years ago..

manc01 just jumped in to ask how easy it is to adjust the odo..

Not sure exactly, but I believe most tuners would have access to the tools required to adjust the odo to whatever they want. Like with all imports, you should check other items for wear, this will help identify a false Odo reading..

How is the odometer actually wound back? If it is as common as everyone seems to think then it must be pretty simple??

Electronically.

One of the guys came across an item in yahoo Japan auction the other day that was a service to wind back the clock. If the condition of the car doesn't match whats in front of you, then its been wound.

There are other things like De-Reg certs that capture the kms based on the last 3 years (I think), and of course the auction sheets for the car.

But really, what does it matter - buy off condition rather than the number on the dash. We all know most of the dealers wind it back. Its no big surprise.

brakes are a good thing to check too.. if it shows 10,000km on the odo, but has 'lipped' brake rotors.. you will know something is wrong..

not really, I heard v35's chew through rotors like no tomorrow.....it's not uncommon to see lipped rotors on only 20000-30000kms if it was driven hard...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pressure when IDLING, is meant to be 51PSi... So that amperage value needs to go up a fair chunk... I'd personally be factoring for more like 12amp at least on those runs, and at that point you need to hope the already there wiring doesn't drop you a volt or two, as that's a lot of fuel pressure flow drop off from 13.5 to 12V! Taking idle pressure of 51psi, means the pump will be drawing a MINIMUM of 9amps all the time based on your reading of the graph (3bar base, then allowing an extra 0.5bar for boost = roughly 51psi)
    • Hi all,  I am in the market for an R200 longnose diff out of a Z31 300ZX, or S12 RSX, DR30 skyline, or similar, in a 3.9 ratio.  Preferably a late model one with the M12 crownwheel bolts.  The only easy to find advert for one of these was my ad back in 2007 when I sold it on this forum.  I sold the diff as I had sold the car it goes to, but as it turns out, after 18 years I got the car back late last year, so now I'm looking for the diff !  If anyone knows where to find a longnose R200 LSD with the M12 crownwheel bolts, drop me a line at [email protected] - Bonus paid if soomeone comes up with the original diff (stranger things have happened !).  Cheers   Ben D    
    • Hi everyone, I used to post here a bit from 2004-2013, when I owned various Nissans, in particular my S12 RSX gazelle, which was sold in 2007.  As luck would have it, after an 18 year hiatus, the car found its way back to me last year, and over the past 11 months I have had the pleasure of restoring it with my kids.  One thing that I am after in particular is a 3.9 ratio R200 LSD for it.  I actually sold the one out of the car here back in 2007 , and it would be incredible if I could track down who I sold it to, so I can see how they have progressed over the years (and to be honest, to see whether I can get the diff back !).  Anyways, hi all and let me know "where are the R200 Longnose diffs all at these days ?  Cheers Ben D  
    • Arms will be the same as the G35 or 350Z, but as above, there was a change in the lower control arm where it connects to the ball joint.  That said, you can remove the ball joint cone from your old ball joints and fit them to the new ball joints.  To be honest, I didn't think the ball joints themselves were different. The main ball joint is a bit awkward to replace, you really need to remove the steering knuckle to press out the old one.  Some people have used tools to remove it in place, but it just seemed too hard to get to. If you are going to press out/in that ball joint, then you may as well just replace the bushings in the LCA and the compression rod.  You can buy the compression rod bushing from Nissan, but the LCA bushes, you will need to go aftermarket. Much cheaper than buying the whole arm.
    • Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
×
×
  • Create New...