Jump to content
SAU Community

Recommended Posts

I have bronze te37's 18*9 off set 10 with toyo 18*275*35 on my r34 gtr 2001 non vspec....close to new with no marks and they dont scrub

I want to change them for gold gt-c ( always been my favourite)19*9.5 but I dont know what off set I need and tire size.

Would these rims fit like the seller says and r these tyres any good to me. Thanks for any help

http://www.skylinesaustralia.com/forums/topic/348547-fs-19-volk-gtc/page__p__5604692__hl__volk__fromsearch__1#entry5604692

Link to comment
https://www.sau.com.au/forums/topic/349011-r34-gtr-gtc-19s/
Share on other sites

Just make sure that once you've decided on offset, such as +12 for your GT-R, that the GT-C rims cover your calipers.

GT-C rims come with a "Face 1" where the spokes are flatter > they won't quite clear your calipers with a +12 offset (unless you use spacers).

GT-C rims come with a "Face 2" where the spokes are a bit more concave > they clear larger Brembos, APs etc with a +12 offset.

Read > http://www.newerapar...0&ProductID=297

*Edit:- I've just noticed that the advertisement is offering a staggered set with offsets vastly different to what I'd put onto a R34 GT-R.

If you still want those with that offset at the front, they will probably clear your Brembos.

*Edit:- I run +12 Offset on my ADVAN RG rims

Link to comment
https://www.sau.com.au/forums/topic/349011-r34-gtr-gtc-19s/#findComment-5608768
Share on other sites

I have bronze te37's 18*9 off set 10 with toyo 18*275*35 on my r34 gtr 2001 non vspec....close to new with no marks and they dont scrub

I want to change them for gold gt-c ( always been my favourite)19*9.5 but I dont know what off set I need and tire size.

Would these rims fit like the seller says and r these tyres any good to me.

edit

:FRONT

19 X 9.5 +37 (will clear big brakes, have tested) - Face 1 with no tyre.

REAR

19 X 9.5 +46 - Face 2

Brand new Nitto tyres - 225/35/19 (should re-fit these to the front and get bigger once to the rear) would these tyres be any good to me on the front ???

Thanks for any help

here is the link to the rims

http://www.skylinesa..._1#entry5604692

Link to comment
https://www.sau.com.au/forums/topic/349011-r34-gtr-gtc-19s/#findComment-5609119
Share on other sites

i dont know much about offset and stuff but they would look super gay on a gtr, i got 17x9.5 37 on the back my gtt and they sit in like 1.5-2cms in the guard

yes i agree that would look gay times 10

Just make sure that once you've decided on offset, such as +12 for your GT-R, that the GT-C rims cover your calipers.

GT-C rims come with a "Face 1" where the spokes are flatter > they won't quite clear your calipers with a +12 offset (unless you use spacers).

GT-C rims come with a "Face 2" where the spokes are a bit more concave > they clear larger Brembos, APs etc with a +12 offset.

Read > http://www.newerapar...0&ProductID=297

*Edit:- I've just noticed that the advertisement is offering a staggered set with offsets vastly different to what I'd put onto a R34 GT-R.

If you still want those with that offset at the front, they will probably clear your Brembos.

*Edit:- I run +12 Offset on my ADVAN RG rims

yes i dont want to use spacers... so off set +37 face 1 for the front any good .....off set +46 face 2 for the back any good... if not what would be the correct off set to buy if i had to buy new..

post-76514-0-94192100-1294027517_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/349011-r34-gtr-gtc-19s/#findComment-5609150
Share on other sites

  • 2 months later...
  • 1 month later...

Hey guys/ girls

I have a R34 GTR and i'm very interested in getting GT-C 20 x 10.5 +12 Face 2

Would that muck around with my 4wd system ? Coz I dont wanna settle with 19in

And would i have to do any modifications to make them fit ?

Link to comment
https://www.sau.com.au/forums/topic/349011-r34-gtr-gtc-19s/#findComment-5803044
Share on other sites

I have Volk GT-C face 2 19x9.5 on my 34 GTR the offset is +11 the tyres are 275/30 this is what rays engineering recommanded to use on a 33/34 GTR with 19x9.5, not sure how much difference +12 would make as terry has recommanded

For future reference

Some of the info in this thread is not correct (points finger at Terry, nicely)

I run 19x9.5 +12 GTC's Face 2 (BAKES old R34 GTR wheels)

He use to run a 3-5mm spacer to clear the Brembo's

+12 Face 2 are "B" disk. They miss my R34 GTT calipers by 1mm

+11 Face 2 are "A" disk which are for brembo's. Only 1mm different in offset but 5-6mm difference in caliper clearance

You can confirm this reading the Rays wheel charts

The difference in extra calpier clearance on the A disk +11 is done by running a smaller outer rim width (less dish) than the B disk +12.

Link to comment
https://www.sau.com.au/forums/topic/349011-r34-gtr-gtc-19s/#findComment-5816167
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Order for the 2025 model R35 GT-R were accepted from 3rd March and 26th August the last order rolled off the production line at the Tochigi plant. Concerning the R35 GT-R replacement, current Nissan CEO Ivan Espinosa said "Nothing has been decided about the GT-R at this time, but we are well aware that everyone is waiting. The GT-R will evolve and reappear in the future. Please be patient until that day comes." Nissan has a lot of issues with management and finances so take Espinosa's words with a big grain of salt. From what discussions I've had and read about here in Japan, not a lot of people are confident about Nissan's future, let alone the next GT-R. 
    • Thanks. We getting some parts along too so he will be solving the speed issue like next week so i will let you know what he came up with.   
    • 21 is explicitly the coils detected as the issue. Is it guaranteed the actual issue? No. Just the ECU thinks it is. When you say rattling, describe it better, get an audio clip as best you can if possible.
    • Yea got me coppers. Bad news is I just put them in and the car still has the light and shakes. I also noticed I hear like rattling coming from the exhaust piping right under me. Does 21 also have a possibility of being O2 sensors?   So, coil packs are good, the harness is good, the MAF is working, and obviously the spark plugs just replaced and working.
    • Make sure you drop the GTT base tune back in, and set your injectors again, this will remove anything playing up with it you may have removed. Possibly lean there as it's normally a fast transient going THROUGH atmospheric pressure, and a turbo motor would then quickly go richer as boost builds. The only worry you MIGHT have is ignition timing, as the DE is higher compression than the DET from memory. But again, you're not in boost, so the DE motor will be a lot more forgiving at atmospheric.   Get Murray, Kinkstahs, and Johnny's input on tuning haltechs, those guys have played with tuning enough in the past to be able to help now you're past the trouble shooting stage of the MAP issue
×
×
  • Create New...