Jump to content
SAU Community

Recommended Posts

hey guys, got through the first tank on the new car and got about 250km outta 48ltrs. =about 18L/100. im guessing my o2's have never been replaced so im on the hunt for some. had a brows on the forum but the only place i can find them is at kudos motorsport which are originals for 480bux. anyone know where i can get them from cheaper?? if not them i think ill get the pfc tuned without the o2's working.

Link to comment
https://www.sau.com.au/forums/topic/349334-02-sensors-for-33-gtr/
Share on other sites

wiring is no problems. i know the tuning hadnt been done in a long time ten four but it probably needs new ones anyway. i have a look on the new for those o2' and see what i can come up with. i recon the car should be getting around the 14L/100 around town and 12 on the highway. the 18L/100 is on 10psi so its real bad but will get it sorted.

thanks guys

wiring is no problems. i know the tuning hadnt been done in a long time ten four but it probably needs new ones anyway. i have a look on the new for those o2' and see what i can come up with. i recon the car should be getting around the 14L/100 around town and 12 on the highway. the 18L/100 is on 10psi so its real bad but will get it sorted.

thanks guys

You should be able to get better than the figures you've quoted, however, that depends on your right foot :rolleyes:

will chase that up tomorrow, thanks. also just pulled off the AFM's to clean them and they were very dirty, looks like they haven't been cleaned in a long time. back one had alot of oil on it from the oil breather line so im going to fit a catch can to that side and that should fix that problem.

found this web page http://members.pcug.org.au/~jdeakins/facts.html

got good info on it, looks like i can get them for about 125 each + shipping, part no 0za395-ec. will need to be modified to fit plugs but thats 50% cheaper than the originals.

these are suposed to be the same as the rb25 ones. can anyone confirm that.

will be ringing them back next week to get a price on the boch 0 258 005 726. these are the replacements for r33 and r34 GTR's

ordering two rb25 o2 sensors tomorrow. only one needs a plug change. part number NKT OZA 395-E2 from Kudos Motorsport. $168 for two delivered. These work on R33 and R34 GTR'S but not R32 GTR'S.

Thanks for your help guys

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...